Next-in-Thread Next Message

Question Problem on Toshiba Dynabook SS6000 

Forum: PCMCIA on Toshiba laptops
Date: 1999, Nov 23
From: Barry Yip kwyip

Hi All,

I've difficulty for the pcmcia service to initialise properly
on a Toshiba DynaBook SS6000. This model is available in
Japanese version only. I've access to quite a few other
Toshiba models and the pcmcia package works great (kudos to
developers) so far except for this particular model. 

I am using Linux 2.2.13 and PCMCIA Card Services 3.1.4. Here
is the message shows up when booting.

Intel PCIC probe:
  Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 19, mem 0x68000000, 2 sockets
    host opts[0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20]
    host opts[1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21]

At this point, the system hangs up completely.

I will appreciate if there is any work around and anything I can check.

Regards,

Barry

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Probably an interrupt scan failure by David Hinds, 1999, Nov 23

Add Message to: "Problem on Toshiba Dynabook SS6000"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10