Next-in-Thread Next Message

Question Problem on Toshiba Dynabook SS6000 

Forum: PCMCIA on Toshiba laptops
Date: 1999, Nov 23
From: Barry Yip kwyip

Hi All,

I've difficulty for the pcmcia service to initialise properly
on a Toshiba DynaBook SS6000. This model is available in
Japanese version only. I've access to quite a few other
Toshiba models and the pcmcia package works great (kudos to
developers) so far except for this particular model. 

I am using Linux 2.2.13 and PCMCIA Card Services 3.1.4. Here
is the message shows up when booting.

Intel PCIC probe:
  Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 19, mem 0x68000000, 2 sockets
    host opts[0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 20/20]
    host opts[1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr 0x02] [no pci irq] [lat 168/176] [bus 21/21]

At this point, the system hangs up completely.

I will appreciate if there is any work around and anything I can check.



Next-in-Thread Next Message

Select this message: Problem on Toshiba Dynabook SS6000

Messages Inline: 1 All Outline: 1 2 All

1. None Probably an interrupt scan failure by David Hinds, 1999, Nov 23

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]