|
Hi,
I had my Ethernetcard D-Link DFE-660 working with RH 6.1 and pcmcia-3.0.14. After I tried to configure my soundcard it stopped working. But since then I was not able to get my network working again. I checked that the sound modules do not get loaded any more but that changed nothing. I now upgraded to Kernel 2.2.13 and pcmcia-3.1.4 but with no success. When the card is inserted I get 2 beeps and ifconfig -a shows:
eth0 Link encap:Ethernet HWaddr 00:80:C8:8F:61:0C
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:5 Base address:0x200
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:3924 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
which looks good. dmesg tells me .....
Linux PCMCIA Card Services 3.1.4
kernel build: 2.2.13 #1 Tue Nov 23 14:03:51 CET 1999
options: [pci] [cardbus] [apm]
Intel PCIC probe:
Toshiba ToPIC97 PCI-to-CardBus at bus 0 slot 2, mem 0x68000000, 2 sockets
host opts [0]: [slot 0xf0] [ccr 0x10] [cdr 0x86] [rcr
0x02] [no pci irq] [lat 168/176] [bus 20/20]
host opts [1]: [slot 0xf0] [ccr 0x20] [cdr 0x86] [rcr
0x02] [no pci irq] [lat 168/176] [bus 21/21]
ISA irqs (default) = 4,5,7,9,10,12 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 21): vendor 0x1011, device 0x0019
cs: cb_config(bus 21)
fn 0 bar 1: io 0x200-0x27f
fn 0 bar 2: mem 0x60081000-0x600813ff
fn 0 rom: mem 0x60041000-0x60080fff
cs: cb_enable(bus 21)
bridge io map 0 (flags 0x21): 0x200-0x27f
bridge mem map 0 (flags 0x1): 0x60041000-0x60081fff
tulip_attach(bus 21, function 0)
tulip.c:v0.91 4/14/99 becker@cesdis.gsfc.nasa.gov (modified
by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
eth0: Digital DS21143 Tulip rev 73 at 0x200, 00:80:00:80:00:80, IRQ 5.
eth0: EEPROM default media type 10baseT.
eth0: MII transceiver #0 config 3000 status 7809 advertising 01e1.
which also looks good. But as soon as I try to start the network either with /etc/rc.d/init.d/network start or simply with ifconfig eth0 129.69.129.119 netmask 255.255.255.0 broadcast 129.69.120.255 ifconfig crashes with the following message
Unable to handle kernel NULL pointer dereference at virtual address 00000000
current->tss.cr3 = 008a0000, %cr3 = 008a0000
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c4037051>]
EFLAGS: 00010246
eax: fffffff8 ebx: ffffffff ecx: 00000000 edx: c3c58c08
esi: 00000000 edi: c3c83c60 ebp: c06efdf0 esp: c06efda4
ds: 0018 es: 0018 ss: 0018
Process ifconfig (pid: 697, process nr: 26, stackpage=c06ef000)
Stack: c3c83c60 00000000 00000286 c10183c0 00000610 00000008 c06efe48 00000003
0000001c c01c1cc7 0000016d c3c58c08 00000200 c3c58c00 c0557000 00000200
00000286 000000c8 c06efe44 c06efe44 c4036c04 c3c83c60 00000001 c3c83c60
Call Trace: [<c01c1cc7>] [<c4036c04>] [<c4036fb7>] [<c0164650>] [<c016515b>] [<c
01645a9>] [<c017c28f>]
[<c017c16d>] [<c017dc8a>] [<c012b0a0>] [<c016115f>] [<c0162183>] [<c010df db>] [<c012d08f>] [<c0108bdd>]
[<c0108ad8>]
Code: 8a 06 8b 55 08 88 42 3c 83 7d 0c 00 74 15 8b 45 e8 0f b6 48
Is there anybody who knows whats wrong or what I am missing. The strange thing is that it worked but I am not able to get back to that. The hardware seems to be fine as I am able to use the card with Windows. Thanks for any suggestion Kai Hoefler
|
[ Edit This Forum ]