Next-in-Thread Next Message

Feedback Don't think so 

Forum: PCMCIA on Toshiba laptops
Re: Question ifconfig crash on a Satellite 4070CDT with D-Link DFE-660 (Kai Hoefler)
Re: None Resource conflict? (David Hinds)
Date: 1999, Nov 24
From: Kai Hoefler Kai

Thank you for your instant response.

I do not think this is a resource conflict, as the soundcard is not and no drivers are loaded. I changed the IO Port settings and the IRQ but with no success.

Meanwhile I looked (as you suggested) at the messages from the time when the card was working. And it looks like there might be something usefull.

In times when the card was working it told

 eth0: Digital DS21143 Tulip rev 65 at 0x200, 00:80:C8:8F:61:0C, IRQ 5. 
 eth0:  EEPROM default media type Autosense. 
 eth0:  Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. 
 eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1. 

In contrary to when it is not working: (Note the changed port and IRQ due to the modification of config.opt you suggested)

 eth0: Digital DS21143 Tulip rev 73 at 0x400, 00:80:00:80:00:80, IRQ 9.
 eth0:  EEPROM default media type 10baseT.
 eth0:  MII transceiver #0 config 3000 status 7809 advertising 01e1

It looks like he think there is another Chipset revision present now, and he is not even able to read the MAC address.

A DOS diagnosis tool read the following MAC configuration

 Node ID 00 80 C8 8F 61 0C   
 I/O Base Address 500 
 Interrupt Number 11 

Is this of any help to you or anybody who knows something about?

Thanks
       Kai

Next-in-Thread Next Message

Select this message: Don't think so

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]