Next-in-Thread Next Message

News PCMCIA driver release 3.0.8 

Forum: Announcements of PCMCIA driver updates
Date: 1999, Jan 22
From: David Hinds dhinds

The most significant feature of this release for most people is that it will build cleanly against the pre-2.2 kernels. APA1480A support is also fixed for these kernels.

In other action, I've made some changes in how cardmgr responds to signals. In the past, a SIGHUP caused cardmgr to forcibly unload all client drivers, reload its configuration files, then reconfigure all cards. Now, it just rescans the configuration files, and doesn't touch cards. Also, now a SIGTERM will only shut down cards that are not busy. This should permit cleaner shutdowns when the root filesystem is on a PCMCIA device: in the past, cardmgr could muck things up by unloading ide_cs even when a device was mounted.

The i82365 module now recognizes the TI 1251A, 1251B, and 1450 bridges, but I'm told that the 1251A in the newer Thinkpad 600's still does not work properly. I haven't been able to deduce what's wrong by staring at the datasheet. It might help if someone running a recent kernel could send me their /proc/bus/pccard/* dumps.

The token-ring driver seems to still have some severe problems. What I'd *really* like would be for someone to volunteer to take over maintenance of this driver, since I have no token ring experience and no appropriate hardware.

- Dave

Next-in-Thread Next Message

Select this message: PCMCIA driver release 3.0.8

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]