|
0)
If i remove one card (PCMCIA ) the other works fine.
all tests are under : Kernel 2.2.16, wireless tools X.20 and
pcmcia package x.19
Test 01 : With 1 X PCI->PCMCIA and 1X ISA->PCMCIA driver wavelan2_cs 6.02 I reproduce the list item 11.2 :
May 18 03:28:49 xd kernel: eth3: WaveLAN/IEEE, HCF failure: "Error code 131" May 18 03:28:49 xd cardmgr[7886]: get dev info on socket q failed: No such device Test 02 : 2Xpci->PCMCIA 02.1 ) Wavelan2_cs driver
Aug 26 16:57:13 XX kernel: PCI routing table version 1.0 at 0xf0d00 Aug 26 16:57:13 XX kernel: Intel PCIC probe: Aug 26 16:57:13 XX kernel: TI 1225 rev 01 PCI-to-CardBus at slot 00:09, mem 0x68000000 Aug 26 16:57:13 XX kernel: host opts [0]: [pci only] [pci irq 12] [lat 32/176] [bus 32/34] Aug 26 16:57:13 XX kernel: host opts [1]: [pci only] [pci irq 12] [lat 32/176] [bus 35/37] Aug 26 16:57:13 XX kernel: PCI card interrupts, PCI status changes Aug 26 16:57:13 XX kernel: TI 1225 rev 01 PCI-to-CardBus at slot 00:0b, mem 0x68002000 Aug 26 16:57:13 XX kernel: host opts [0]: [pci only] [pci irq 11] [lat 32/176] [bus 38/40] Aug 26 16:57:13 XX kernel: host opts [1]: [pci only] [pci irq 11] at 32/176] [bus 41/43] Aug 26 16:57:13 XX kernel: PCI card interrupts, PCI status changes Aug 26 16:57:13 XX cardmgr[229]: starting, version is 3.1.19 Aug 26 16:57:13 XX cardmgr[229]: watching 4 sockets Aug 26 16:57:13 XX kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff Aug 26 16:57:13 XX kernel: cs: IO port probe 0x0800-0x08ff: clean. Aug 26 16:57:13 XX kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 Aug 26 16:57:13 XX kernel: cs: IO port probe 0x0a00-0x0aff: clean. Aug 26 16:57:14 XX cardmgr[229]: initializing socket 0 Aug 26 16:57:14 XX kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Aug 26 16:57:14 XX cardmgr[229]: socket 0: Lucent Technologies WaveLAN/IEEE Aug 26 16:57:14 XX cardmgr[229]: executing: 'modprobe wavelan2_cs port_type=3' Aug 26 16:57:14 XX kernel: eth1: WaveLAN/IEEE, io_addr 0x100, irq 12, mac_address 00:60:1D:23:DD:E0 Aug 26 16:57:14 XX cardmgr[229]: executing: './network start eth1' Aug 26 16:57:14 XX cardmgr[229]: + cat: /var/lib/pcmcia/scheme: No such file or directory Aug 26 16:57:14 XX cardmgr[229]: initializing socket 2 Aug 26 16:57:14 XX cardmgr[229]: socket 2: Lucent Technologies WaveLAN/IEEE Aug 26 16:57:15 XX kernel: eth2: WaveLAN/IEEE, HCF failure: "Error code 256" Aug 26 16:57:15 XX cardmgr[229]: get dev info on socket 2 failed: No such device^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 02.2 ) wlan_cs Driver. Reproduce list item 11.0
wvlan0 IEEE 802.11-DS ESSID="test" Nickname:"dev-1"
Frequency:2.422GHz Sensitivity:1/3 Mode:Ad-Hoc
....
......
wvlan1 IEEE 802.11-DS ESSID=""
Frequency:52Mhz Sensitivity:0/3 Mode:Ad-Hoc
Access Point: FF:BF:01:00:01:01
Bit Rate=0kb/s RTS thr=0 B Fragment thr=0 B
the 02.2 test is only to compile all informations here, i know, wlan_cs do not support multiples wavelan. Any idea ? Thanks, Marcio Gomes
|
Messages