Next-in-Thread Next Message

None Need more information 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Warning Problem with TI1225 and Lucent Wavelan (even in 3.1.14) (Alen Salamun)
Date: 2000, Apr 12
From: David Hinds <dhinds@pcmcia.sourceforge.org>

You should post the startup messages from the PCMCIA drivers.  I can't
really guess without seeing them.  Maybe it is an IO port conflict.
You might try recompiling the PCMCIA package with "PnP BIOS support"
switched on.

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 1

More More info on the problem

Re: None Need more information (David Hinds)
Date: 2000, Apr 12
From: Alen Salamun ALiEN

Hi!

This is the cutout of the log file:

Apr 12 20:08:45 hal9000 kernel:   options:  [pci] [cardbus] [apm]
Apr 12 20:08:45 hal9000 kernel: PCI routing table version 1.0 at 0xfd490
Apr 12 20:08:45 hal9000 kernel:   00:14.0 -> irq 10
Apr 12 20:08:45 hal9000 kernel:   00:14.1 -> irq 10
Apr 12 20:08:45 hal9000 kernel: Intel PCIC probe:
Apr 12 20:08:45 hal9000 kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 00:14, mem 0xe8001000
Apr 12 20:08:45 hal9000 kernel:     host opts [0]: [pci only] [pci irq 10] [lat 64/176] [bus 224/0]
Apr 12 20:08:45 hal9000 kernel:     host opts [1]: [pci only] [pci irq 10] [lat 64/176] [bus 228/0]
Apr 12 20:08:45 hal9000 kernel:     PCI card interrupts, PCI status changes
Apr 12 20:08:45 hal9000 cardmgr[233]: starting, version is 3.1.14
Apr 12 20:08:45 hal9000 cardmgr[233]: watching 2 sockets
Apr 12 20:08:45 hal9000 kernel: cs: IO port probe 0x1000-0x17ff: clean.
Apr 12 20:08:45 hal9000 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x4d0-0x4d7
Apr 12 20:08:45 hal9000 kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Apr 12 20:08:45 hal9000 cardmgr[233]: initializing socket 0
Apr 12 20:08:45 hal9000 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Apr 12 20:08:45 hal9000 cardmgr[233]: socket 0: Lucent Technologies WaveLAN/IEEE
Apr 12 20:08:45 hal9000 cardmgr[233]:   product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
Apr 12 20:08:45 hal9000 cardmgr[233]:   manfid: 0x0156, 0x0002  function: 6 (network)
Apr 12 20:08:45 hal9000 cardmgr[233]: executing: 'insmod /lib/modules/2.2.14-15mdk/pcmcia/wavelan2_cs.o medium_r
eservation=500 enable_encryption=Y key_1=XXXXX network_name=XXXXX station_name=XXXXX'

This is the last line in the log. I have tried with Bios PNP on and off, same results. I must say that with older pcmcia source, machine did not lockup except if doing "cardstat ident".

It works flawlessly with ISA controler...

Bye, Alen

Need more information


Add Message to: "Need more information"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10