Need more information 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Problem with TI1225 and Lucent Wavelan (even in 3.1.14) (Alen Salamun)
Date: 2000, Apr 12
From: David Hinds <dhinds@pcmcia.sourceforge.org>

You should post the startup messages from the PCMCIA drivers. I can't really guess without seeing them. Maybe it is an IO port conflict. You might try recompiling the PCMCIA package with "PnP BIOS support" switched on. -- Dave

Messages Inline: Outline:

More info on the problem Re: Need more information (David Hinds) Date: 2000, Apr 12 From: Alen Salamun ALiEN

Hi! This is the cutout of the log file: Apr 12 20:08:45 hal9000 kernel: options: [pci] [cardbus] [apm] Apr 12 20:08:45 hal9000 kernel: PCI routing table version 1.0 at 0xfd490 Apr 12 20:08:45 hal9000 kernel: 00:14.0 -> irq 10 Apr 12 20:08:45 hal9000 kernel: 00:14.1 -> irq 10 Apr 12 20:08:45 hal9000 kernel: Intel PCIC probe: Apr 12 20:08:45 hal9000 kernel: TI 1225 rev 01 PCI-to-CardBus at slot 00:14, mem 0xe8001000 Apr 12 20:08:45 hal9000 kernel: host opts [0]: [pci only] [pci irq 10] [lat 64/176] [bus 224/0] Apr 12 20:08:45 hal9000 kernel: host opts [1]: [pci only] [pci irq 10] [lat 64/176] [bus 228/0] Apr 12 20:08:45 hal9000 kernel: PCI card interrupts, PCI status changes Apr 12 20:08:45 hal9000 cardmgr[233]: starting, version is 3.1.14 Apr 12 20:08:45 hal9000 cardmgr[233]: watching 2 sockets Apr 12 20:08:45 hal9000 kernel: cs: IO port probe 0x1000-0x17ff: clean. Apr 12 20:08:45 hal9000 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x4d0-0x4d7 Apr 12 20:08:45 hal9000 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Apr 12 20:08:45 hal9000 cardmgr[233]: initializing socket 0 Apr 12 20:08:45 hal9000 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Apr 12 20:08:45 hal9000 cardmgr[233]: socket 0: Lucent Technologies WaveLAN/IEEE Apr 12 20:08:45 hal9000 cardmgr[233]: product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", "" Apr 12 20:08:45 hal9000 cardmgr[233]: manfid: 0x0156, 0x0002 function: 6 (network) Apr 12 20:08:45 hal9000 cardmgr[233]: executing: 'insmod /lib/modules/2.2.14-15mdk/pcmcia/wavelan2_cs.o medium_r eservation=500 enable_encryption=Y key_1=XXXXX network_name=XXXXX station_name=XXXXX' This is the last line in the log. I have tried with Bios PNP on and off, same results. I must say that with older pcmcia source, machine did not lockup except if doing "cardstat ident". It works flawlessly with ISA controler... Bye, Alen

to: "Need more information"