Next-in-Thread Next Message

Sad Lucent WaveLAN/IEEE fails with updated firmware 

Forum: PCMCIA Wireless Network Adapter Issues
Date: 2000, Apr 18
From: Michael Vasilenko acid

I have two Lucent WaveLAN/IEEE Turbo 11Mb cards. Recently
I've updated firmware on one of it from v4.52 to v6.04

And for now, pcmcia-cs's wvlan_cs driver unable to startup it:

wavelan2_cs driver has problems too (on both cards) - see thread 16 (not sure about number)

kernel: Linux PCMCIA Card Services 3.1.14
kernel:   kernel build: 2.2.14 #1 Tue Apr 18 10:11:28 EEST 2000
kernel:   options:  [pci] [cardbus]
kernel: PCI routing table version 1.0 at 0xfdf10
kernel: Intel PCIC probe:
kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 00:10, mem 0xea000000
kernel:     host opts [0]: [pci only] [pci irq 10] [lat 64/176] [bus 188/0]
kernel:     host opts [1]: [pci only] [pci irq 10] [lat 64/176] [bus 192/0]
kernel:     PCI card interrupts, PCI status changes
cardmgr[757]: starting, version is 3.1.14
cardmgr[757]: watching 2 sockets
kernel: cs: IO port probe 0x1000-0x17ff: clean.
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean.
cardmgr[757]: initializing socket 0
kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
cardmgr[757]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter
cardmgr[757]: executing: 'insmod /lib/modules/2.2.14/pcmcia/wvlan_cs.o port_type
kernel: wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.4
kernel: wvlan_cs: (c) Andreas Neuhaus <>
kernel: wvlan_cs: index 0x01: Vcc 5.0, irq 10, io 0x0100-0x013f
kernel: wvlan_cs: Registered netdevice wvlan0
kernel: wvlan_cs: Initialization failed!
cardmgr[757]: executing: './network start wvlan0'

Next-in-Thread Next Message

Select this message: Lucent WaveLAN/IEEE fails with updated firmware

Messages Inline: 1 All Outline: 1 2 All

1. Idea Possible fix by Atanu Ghosh, 2000, Apr 21
2. Feedback Lucent wavelan2_cs driver works by Charlie Price, 2000, Apr 27

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]