Next-in-Thread Next Message

Question cs: socket 0 timed out during reset 

Forum: PCMCIA Wireless Network Adapter Issues
Date: 2000, Apr 25
From: Peter Kropf peterk

I had a WaveLAN IEEE Gold card working in my Linux server and routing from the wireless lan through the ethernet card out to the Internet. (Surfing from the back porch is very cool...) However, something seems to have gone wrong. When I came home yesterday, the server was hung. So I rebooted. Now I'm receiving timed out during reset messages whenever the pcmcia service is started. I traced it to the insertion of the WaveLAN card into the PCMCIA-ISA adapter but haven't been able to get much further.

Any help would be great! Thanks!

Apr 25 10:44:49 wacko kernel: Linux PCMCIA Card Services 3.1.14 
Apr 25 10:44:49 wacko kernel:   kernel build: 2.2.15-2.5.0 #3 SMP Wed Apr 12 22:30:30 PDT 2000 
Apr 25 10:44:49 wacko kernel:   options:  [pci] [cardbus] [apm] 
Apr 25 10:44:49 wacko kernel: Intel PCIC probe:  
Apr 25 10:44:49 wacko kernel:   Vadem VG-469 rev 00 ISA-to-PCMCIA at port 0x3e2 ofs 0x00 
Apr 25 10:44:49 wacko kernel:     host opts [0]: none 
Apr 25 10:44:49 wacko kernel:     host opts [1]: none 
Apr 25 10:44:49 wacko kernel:     ISA irqs (scanned) = 5 polling interval = 1000 ms 
Apr 25 10:44:49 wacko cardmgr[1652]: starting, version is 3.1.14
Apr 25 10:44:49 wacko cardmgr[1652]: watching 2 sockets
Apr 25 10:44:49 wacko kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Apr 25 10:44:49 wacko kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x240-0x24f 0x290-0x297 0x300-0x307 0x388-0x38f 0x4d0-0x4d7 
Apr 25 10:44:49 wacko kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Apr 25 10:44:52 wacko kernel: cs: socket 0 timed out during reset 

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 2 3 All

None Hmmm, maybe a hardware failure?

Re: Question cs: socket 0 timed out during reset (Peter Kropf)
Date: 2000, Apr 25
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Do you have any other PCMCIA cards that you can try?  This is a fairly
low level failure in a fairly well tested part of the driver, and I'm
wondering if this card (or the adapter??) could be fried.  If you've
got a wireless network, you must have several of the cards: can you
swap them around and see if the problem is the card or the adapter?

I assume you've done a cold boot and that didn't help?  I'd also try
re-seating the PCMCIA adapter card, and the Wavelan card.

-- Dave
1. Agree Looks that way by Peter Kropf, 2000, Apr 25
cs: socket 0 timed out during reset


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]