Next-in-Thread Next Message

None That doesn't sound like a resource issue 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question ThinkPad 600 and Wavelan card (Jonathon Fletcher)
Date: 2000, May 18
From: David Hinds <dhinds@pcmcia.sourceforge.org>

If you are receiving data, you almost certainly don't have an irq/port
problem.  You can check /proc/interrupts to see if the interrupt count
is incrementing for the Wavelan device; and "ifconfig" will show
whether the driver thinks that packets are being sent and received.
Are you sure your network settings are correct?

-- Dave

Next-in-Thread Next Message

Select this message: That doesn't sound like a resource issue

Messages Inline: 1 All Outline: 1 2 All

1. None Asus P3B-F and Ricoh RL5C475 - mixed irq ? by Jonathon Fletcher, 2000, May 19
(_ None Several PCI issues here by David Hinds, 2000, May 19
(_ None Re: Several PCI issues here by Jonathon Fletcher, 2000, May 19
(_ None Hmmm, I might be wrong about the wvlan_cs driver by David Hinds, 2000, May 19

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]