Next-in-Thread Next Message

None Re: Several PCI issues here

Re: None Several PCI issues here (David Hinds)
Date: 2000, May 19
From: Jonathon Fletcher jonathon

Yay !

  Thank you David. Using 3.1.15 does work much better. I now have 11Mb
connectivity between the two cards.

  Both cards have taken pci irq 9. Your comment about the drivers
puzzles me - the cards seem to be behaving sensibly with the wvlan_cs
driver (1.04). I have the card firmware down at 4.52 (to stop wvlan_cs
choking on the tx threshold) - does the 6.01b driver requirement issue
relate to any firmware differences. I only ask because the cards seem to
be working great with what I believe are pci irqs. Am I likely to be
mistaking my irq types ?

Thanks again,

Jonathon

-- 
  Jonathon Fletcher
  jonathon.fletcher@pobox.com

Next-in-Thread Next Message

Select this message: Re: Several PCI issues here

Messages Inline: 1 All Outline: 1 2 All

1. None Hmmm, I might be wrong about the wvlan_cs driver by David Hinds, 2000, May 19

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode No Frames New Base Frame Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]