Next-in-Thread Next Message

Question WaveLan PCI adapter wierdness 

Forum: PCMCIA Wireless Network Adapter Issues
Date: 2000, Jun 01
From: Neil Radisch nradisch 

I only get errors and transmit timeouts,
thought the card is active and seems to be
configured correctly. The only thing that
seems strange is lspci -vv says that the
card has "pin A routed to IRQ 0".

that can't be right, can it?

Neil

Next-in-Thread Next Message

Messages Inline: 0 1

None More info would help... but...

Re: Question WaveLan PCI adapter wierdness (Neil Radisch)
Date: 2000, Jun 01
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

> 
> that can't be right, can it?

For the Wavelan PCI adapters, you must:

- use current PCMCIA drivers
- use the 6.0.1 beta wavelan2_cs driver from Lucent
- specify "irq_mode=0" for the i82365 driver module

-- Dave

More Did that, didn't help

Re: None More info would help... but... (David Hinds)
Date: 2000, Jun 01
From: Neil Radisch nradisch

Didn't help. The logs show a complete inability to find a PCI interrupt. Even if I specify them with pci_int_list=... it just fails.

Below is the result of lspci -vv and my start logs

BTW, perhaps it has something to do with my motherboard. It's a Tyan Tomcat. Intel i810 chipset with no ISA slots (PC99 compatible and all that). 

00:00.0 Host bridge: Intel Corporation 82810-DC100 GMCH [Graphics Memory Controller Hub] (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0 set

00:01.0 VGA compatible controller: Intel Corporation 82810-DC100 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
	Subsystem: Intel Corporation: Unknown device 0200
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f8000000 (32-bit, prefetchable)
	Region 1: Memory at ffe80000 (32-bit, non-prefetchable)
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: Intel Corporation 82801AA 82810 PCI Bridge (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: ffc00000-ffcfffff
	Prefetchable memory behind bridge: f6a00000-f6afffff
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801AA 82810 Chipset ISA Bridge (LPC) (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set

00:1f.1 IDE interface: Intel Corporation 82801AA 82810 Chipset IDE (rev 02) (prog-if 80 [Master])
	Subsystem: Intel Corporation: Unknown device 2411
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Region 4: I/O ports at ffa0

00:1f.2 USB Controller: Intel Corporation 82801AA 82810 Chipset USB (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation: Unknown device 2412
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at ef80

00:1f.3 SMBus: Intel Corporation 82801AA 82810 Chipset SMBus (rev 02)
	Subsystem: Intel Corporation: Unknown device 2413
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 10
	Region 4: I/O ports at efa0

00:1f.5 Multimedia audio controller: Intel Corporation 82801AA 82810 AC'97 Audio (rev 02)
	Subsystem: Analog Devices: Unknown device 5340
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Interrupt: pin B routed to IRQ 10
	Region 0: I/O ports at e800
	Region 1: I/O ports at ef00

01:04.0 Ethernet controller: Lite-On Communications Inc: Unknown device c115 (rev 25)
	Subsystem: Lite-On Communications Inc: Unknown device c001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 8 min, 56 max, 64 set, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at d800
	Region 1: Memory at ffcfff00 (32-bit, non-prefetchable)
	Expansion ROM at ffc80000 [disabled]
	Capabilities: [44] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0a.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
	Subsystem: SCM Microsystems: Unknown device 2023
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168 set, cache line size 08
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
	Bus: primary=00, secondary=20, subordinate=22, sec-latency=176
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

01:0a.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
	Subsystem: SCM Microsystems: Unknown device 2023
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168 set, cache line size 08
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
	Bus: primary=00, secondary=23, subordinate=25, sec-latency=176
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

May 31 23:10:36 Mozart pcmcia: Starting PCMCIA services:
May 31 23:10:36 Mozart pcmcia:  modules
May 31 23:10:36 Mozart kernel: Linux PCMCIA Card Services 3.1.15 
May 31 23:10:36 Mozart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 
May 31 23:10:36 Mozart kernel:   options:  [pci] [cardbus] [apm] 
May 31 23:10:36 Mozart kernel: Intel PCIC probe:  
May 31 23:10:36 Mozart kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 01:0a, mem 0x68000000 
May 31 23:10:36 Mozart kernel:     host opts [0]: [pci only] [no pci irq] [lat 168/176] [bus 32/34] 
May 31 23:10:36 Mozart kernel:     host opts [1]: [pci only] [no pci irq] [lat 168/176] [bus 35/37] 
May 31 23:10:36 Mozart kernel:     *NO* card interrupts, polling interval = 1000 ms 
May 31 23:10:37 Mozart pcmcia:  cardmgr.
May 31 23:10:37 Mozart cardmgr[572]: starting, version is 3.1.15
May 31 23:10:37 Mozart rc: Starting pcmcia succeeded
May 31 23:10:37 Mozart cardmgr[572]: watching 2 sockets
May 31 23:10:37 Mozart kernel: cs: IO port probe 0x1000-0x17ff: clean. 
May 31 23:10:37 Mozart kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x300-0x307 0x378-0x37f 0x400-0x47f 0x4d0-0x4d7 
May 31 23:10:37 Mozart kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
May 31 23:10:37 Mozart inet: inetd startup succeeded
May 31 23:10:37 Mozart lpd[600]: restarted
May 31 23:10:37 Mozart lpd: lpd startup succeeded
May 31 23:10:37 Mozart cardmgr[572]: initializing socket 0
May 31 23:10:37 Mozart cardmgr[572]: socket 0: Lucent Technologies WaveLAN/IEEE
May 31 23:10:37 Mozart kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
May 31 23:10:37 Mozart keytable: Loading keymap: 
May 31 23:10:37 Mozart cardmgr[572]: executing: 'modprobe wavelan2_cs port_type=3'
May 31 23:10:37 Mozart kernel: wavelan2_cs: RequestIRQ: Resource in use 
May 31 23:10:38 Mozart keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
May 31 23:10:38 Mozart keytable: Loading system font: 
May 31 23:10:38 Mozart rc: Starting keytable succeeded
May 31 23:10:38 Mozart cardmgr[572]: get dev info on socket 0 failed: Resource temporarily unavailable
May 31 23:10:39 Mozart sendmail: sendmail startup succeeded

More more info dump_pirq

Re: None More info would help... but... (David Hinds)
Date: 2000, Jun 01
From: Neil Radisch nradisch

dump_pirq says no PCI interrupt routing table found, and no interrupt routers found.

Neil

Ok Problem solved

Re: None More info would help... but... (David Hinds)
Date: 2000, Jun 01
From: Neil Radisch nradisch

I had to use both pci_irq_list=11,11 irq_mode=0

and swap PCI slots with the wavelan adapter and my other network card.

WaveLan PCI adapter wierdness

Add Message to: "WaveLan PCI adapter wierdness"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10