Next-in-Thread Next Message

More Did that, didn't help 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question WaveLan PCI adapter wierdness (Neil Radisch)
Re: None More info would help... but... (David Hinds)
Date: 2000, Jun 01
From: Neil Radisch nradisch

Didn't help. The logs show a complete inability to find a PCI interrupt. Even if I specify them with pci_int_list=... it just fails.

Below is the result of lspci -vv and my start logs

BTW, perhaps it has something to do with my motherboard. It's a Tyan Tomcat. Intel i810 chipset with no ISA slots (PC99 compatible and all that).

00:00.0 Host bridge: Intel Corporation 82810-DC100 GMCH [Graphics Memory Controller Hub] (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0 set

00:01.0 VGA compatible controller: Intel Corporation 82810-DC100 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
	Subsystem: Intel Corporation: Unknown device 0200
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f8000000 (32-bit, prefetchable)
	Region 1: Memory at ffe80000 (32-bit, non-prefetchable)
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1e.0 PCI bridge: Intel Corporation 82801AA 82810 PCI Bridge (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: ffc00000-ffcfffff
	Prefetchable memory behind bridge: f6a00000-f6afffff
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801AA 82810 Chipset ISA Bridge (LPC) (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set

00:1f.1 IDE interface: Intel Corporation 82801AA 82810 Chipset IDE (rev 02) (prog-if 80 [Master])
	Subsystem: Intel Corporation: Unknown device 2411
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Region 4: I/O ports at ffa0

00:1f.2 USB Controller: Intel Corporation 82801AA 82810 Chipset USB (rev 02) (prog-if 00 [UHCI])
	Subsystem: Intel Corporation: Unknown device 2412
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at ef80

00:1f.3 SMBus: Intel Corporation 82801AA 82810 Chipset SMBus (rev 02)
	Subsystem: Intel Corporation: Unknown device 2413
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 10
	Region 4: I/O ports at efa0

00:1f.5 Multimedia audio controller: Intel Corporation 82801AA 82810 AC'97 Audio (rev 02)
	Subsystem: Analog Devices: Unknown device 5340
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0 set
	Interrupt: pin B routed to IRQ 10
	Region 0: I/O ports at e800
	Region 1: I/O ports at ef00

01:04.0 Ethernet controller: Lite-On Communications Inc: Unknown device c115 (rev 25)
	Subsystem: Lite-On Communications Inc: Unknown device c001
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 8 min, 56 max, 64 set, cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at d800
	Region 1: Memory at ffcfff00 (32-bit, non-prefetchable)
	Expansion ROM at ffc80000 [disabled]
	Capabilities: [44] Power Management version 1
		Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME-
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:0a.0 CardBus bridge: Texas Instruments PCI1225 (rev 01)
	Subsystem: SCM Microsystems: Unknown device 2023
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168 set, cache line size 08
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
	Bus: primary=00, secondary=20, subordinate=22, sec-latency=176
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

01:0a.1 CardBus bridge: Texas Instruments PCI1225 (rev 01)
	Subsystem: SCM Microsystems: Unknown device 2023
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168 set, cache line size 08
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
	Bus: primary=00, secondary=23, subordinate=25, sec-latency=176
	I/O window 0: 00000000-00000003
	I/O window 1: 00000000-00000003
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

May 31 23:10:36 Mozart pcmcia: Starting PCMCIA services:
May 31 23:10:36 Mozart pcmcia:  modules
May 31 23:10:36 Mozart kernel: Linux PCMCIA Card Services 3.1.15 
May 31 23:10:36 Mozart kernel:   kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 
May 31 23:10:36 Mozart kernel:   options:  [pci] [cardbus] [apm] 
May 31 23:10:36 Mozart kernel: Intel PCIC probe:  
May 31 23:10:36 Mozart kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 01:0a, mem 0x68000000 
May 31 23:10:36 Mozart kernel:     host opts [0]: [pci only] [no pci irq] [lat 168/176] [bus 32/34] 
May 31 23:10:36 Mozart kernel:     host opts [1]: [pci only] [no pci irq] [lat 168/176] [bus 35/37] 
May 31 23:10:36 Mozart kernel:     *NO* card interrupts, polling interval = 1000 ms 
May 31 23:10:37 Mozart pcmcia:  cardmgr.
May 31 23:10:37 Mozart cardmgr[572]: starting, version is 3.1.15
May 31 23:10:37 Mozart rc: Starting pcmcia succeeded
May 31 23:10:37 Mozart cardmgr[572]: watching 2 sockets
May 31 23:10:37 Mozart kernel: cs: IO port probe 0x1000-0x17ff: clean. 
May 31 23:10:37 Mozart kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x300-0x307 0x378-0x37f 0x400-0x47f 0x4d0-0x4d7 
May 31 23:10:37 Mozart kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
May 31 23:10:37 Mozart inet: inetd startup succeeded
May 31 23:10:37 Mozart lpd[600]: restarted
May 31 23:10:37 Mozart lpd: lpd startup succeeded
May 31 23:10:37 Mozart cardmgr[572]: initializing socket 0
May 31 23:10:37 Mozart cardmgr[572]: socket 0: Lucent Technologies WaveLAN/IEEE
May 31 23:10:37 Mozart kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
May 31 23:10:37 Mozart keytable: Loading keymap: 
May 31 23:10:37 Mozart cardmgr[572]: executing: 'modprobe wavelan2_cs port_type=3'
May 31 23:10:37 Mozart kernel: wavelan2_cs: RequestIRQ: Resource in use 
May 31 23:10:38 Mozart keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz
May 31 23:10:38 Mozart keytable: Loading system font: 
May 31 23:10:38 Mozart rc: Starting keytable succeeded
May 31 23:10:38 Mozart cardmgr[572]: get dev info on socket 0 failed: Resource temporarily unavailable
May 31 23:10:39 Mozart sendmail: sendmail startup succeeded

Next-in-Thread Next Message

Select this message: Did that, didn't help

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]