|
Didn't help. The logs show a complete inability
to find a PCI interrupt. Even if I specify them
with pci_int_list=... it just fails.
Below is the result of lspci -vv and my start logs BTW, perhaps it has something to do with my motherboard. It's a Tyan Tomcat. Intel i810 chipset with no ISA slots (PC99 compatible and all that).
00:00.0 Host bridge: Intel Corporation 82810-DC100 GMCH [Graphics Memory Controller Hub] (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 set
00:01.0 VGA compatible controller: Intel Corporation 82810-DC100 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA]) Subsystem: Intel Corporation: Unknown device 0200 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin A routed to IRQ 11 Region 0: Memory at f8000000 (32-bit, prefetchable) Region 1: Memory at ffe80000 (32-bit, non-prefetchable) Capabilities: [dc] Power Management version 1 Flags: PMEClk- AuxPwr- DSI+ D1- D2- PME- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:1e.0 PCI bridge: Intel Corporation 82801AA 82810 PCI Bridge (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: ffc00000-ffcfffff Prefetchable memory behind bridge: f6a00000-f6afffff BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corporation 82801AA 82810 Chipset ISA Bridge (LPC) (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set
00:1f.1 IDE interface: Intel Corporation 82801AA 82810 Chipset IDE (rev 02) (prog-if 80 [Master]) Subsystem: Intel Corporation: Unknown device 2411 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Region 4: I/O ports at ffa0
00:1f.2 USB Controller: Intel Corporation 82801AA 82810 Chipset USB (rev 02) (prog-if 00 [UHCI]) Subsystem: Intel Corporation: Unknown device 2412 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at ef80
00:1f.3 SMBus: Intel Corporation 82801AA 82810 Chipset SMBus (rev 02) Subsystem: Intel Corporation: Unknown device 2413 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at efa0
00:1f.5 Multimedia audio controller: Intel Corporation 82801AA 82810 AC'97 Audio (rev 02) Subsystem: Analog Devices: Unknown device 5340 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 set Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at e800 Region 1: I/O ports at ef00
01:04.0 Ethernet controller: Lite-On Communications Inc: Unknown device c115 (rev 25) Subsystem: Lite-On Communications Inc: Unknown device c001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 8 min, 56 max, 64 set, cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at d800 Region 1: Memory at ffcfff00 (32-bit, non-prefetchable) Expansion ROM at ffc80000 [disabled] Capabilities: [44] Power Management version 1 Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME- Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:0a.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: SCM Microsystems: Unknown device 2023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 set, cache line size 08 Interrupt: pin A routed to IRQ 0 Region 0: Memory at <ignored> (32-bit, non-prefetchable) Bus: primary=00, secondary=20, subordinate=22, sec-latency=176 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
01:0a.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) Subsystem: SCM Microsystems: Unknown device 2023 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 set, cache line size 08 Interrupt: pin A routed to IRQ 0 Region 0: Memory at <ignored> (32-bit, non-prefetchable) Bus: primary=00, secondary=23, subordinate=25, sec-latency=176 I/O window 0: 00000000-00000003 I/O window 1: 00000000-00000003 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001
May 31 23:10:36 Mozart pcmcia: Starting PCMCIA services: May 31 23:10:36 Mozart pcmcia: modules May 31 23:10:36 Mozart kernel: Linux PCMCIA Card Services 3.1.15 May 31 23:10:36 Mozart kernel: kernel build: 2.2.14-5.0 #1 Tue Mar 7 21:07:39 EST 2000 May 31 23:10:36 Mozart kernel: options: [pci] [cardbus] [apm] May 31 23:10:36 Mozart kernel: Intel PCIC probe: May 31 23:10:36 Mozart kernel: TI 1225 rev 01 PCI-to-CardBus at slot 01:0a, mem 0x68000000 May 31 23:10:36 Mozart kernel: host opts [0]: [pci only] [no pci irq] [lat 168/176] [bus 32/34] May 31 23:10:36 Mozart kernel: host opts [1]: [pci only] [no pci irq] [lat 168/176] [bus 35/37] May 31 23:10:36 Mozart kernel: *NO* card interrupts, polling interval = 1000 ms May 31 23:10:37 Mozart pcmcia: cardmgr. May 31 23:10:37 Mozart cardmgr[572]: starting, version is 3.1.15 May 31 23:10:37 Mozart rc: Starting pcmcia succeeded May 31 23:10:37 Mozart cardmgr[572]: watching 2 sockets May 31 23:10:37 Mozart kernel: cs: IO port probe 0x1000-0x17ff: clean. May 31 23:10:37 Mozart kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x300-0x307 0x378-0x37f 0x400-0x47f 0x4d0-0x4d7 May 31 23:10:37 Mozart kernel: cs: IO port probe 0x0a00-0x0aff: clean. May 31 23:10:37 Mozart inet: inetd startup succeeded May 31 23:10:37 Mozart lpd[600]: restarted May 31 23:10:37 Mozart lpd: lpd startup succeeded May 31 23:10:37 Mozart cardmgr[572]: initializing socket 0 May 31 23:10:37 Mozart cardmgr[572]: socket 0: Lucent Technologies WaveLAN/IEEE May 31 23:10:37 Mozart kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. May 31 23:10:37 Mozart keytable: Loading keymap: May 31 23:10:37 Mozart cardmgr[572]: executing: 'modprobe wavelan2_cs port_type=3' May 31 23:10:37 Mozart kernel: wavelan2_cs: RequestIRQ: Resource in use May 31 23:10:38 Mozart keytable: Loading /usr/lib/kbd/keymaps/i386/qwerty/us.kmap.gz May 31 23:10:38 Mozart keytable: Loading system font: May 31 23:10:38 Mozart rc: Starting keytable succeeded May 31 23:10:38 Mozart cardmgr[572]: get dev info on socket 0 failed: Resource temporarily unavailable May 31 23:10:39 Mozart sendmail: sendmail startup succeeded
|