Next-in-Thread Next Message

Question iwconfig hangs machine (ISA/wavelan & SMP, wvlan2_cs) 

Forum: PCMCIA Wireless Network Adapter Issues
Date: 2000, Jun 10
From: Alan Knowles alan_k

It's a bit difficult to debug, as all the evidence disappears as soon as I run iwconfig to make a modification.

anyway heres the machine config, if you have any ideas, let me know (I am currently compiling the pcmcia drivers with the lucent binary) uname -a Linux alanathome 2.2.15 #1 SMP Wed Jun 7 02:49:14 HKT 2000 i686 unknown

dmesg cutting
Linux PCMCIA Card Services 3.1.15
  kernel build: 2.2.15 unknown
  options:  [pci] [cardbus] [pnp]
PCI routing table version 1.0 at 0xfdd90
PnP: PNP BIOS installation structure at 0xc00fbe80
PnP: PNP BIOS version 1.0, entry at f0000:bea8, dseg at f0000
Intel PCIC probe: 
  Vadem VG-469 rev 00 ISA-to-PCMCIA at port 0x3e0 ofs 0x00
    host opts [0]: none
    host opts [1]: none
    ISA irqs (default) = 5,9 polling interval = 1000 ms
cs: IO port probe 0x1000-0x17ff: excluding 0x1220-0x122f 0x1330-0x1337 0x1388-0x138f 0x1620-0x162f 0x1730-0x1737 0x1788-0x178f
cs: IO port probe 0x0100-0x04ff: excluding 0x388-0x38f
cs: IO port probe 0x0a00-0x0aff: excluding 0xa28-0xa2f
cs: memory probe 0x0d0000-0x0dffff: clean.

Next-in-Thread Next Message

Select this message: iwconfig hangs machine (ISA/wavelan & SMP, wvlan2_cs)

Messages Inline: 1 All Outline: 1 2 All

1. Feedback binary driver works in this config by Alan Knowles, 2000, Jun 11

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]