Next-in-Thread Next Message

Sad didn't work 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question lucent ieee turbo pci adapter (Bob Cohen)
Re: None 3.1.8 can't figure out the interrupt routing (David Hinds)
Date: 2000, Jan 31
From: Bob Cohen bonobob

That didn't work. Looks like the minimal set of options necessary to get the wavelan module to load is:

 PCIC_OPTS="pci_int=1 irq_mode=0 pci_csc=1 pci_irq_list=7,7"

With this, the module loads, but again interrupts don't work (both card services, and the driver's interrupts). Also, irq7 seems to be the only one that works. How do you find out what irqs are valid for PCI? If I don't specify pci_irq_list, it doesn't work, so obviously probing isn't working.

This may be a red herring, but my bios has a field "reserve irq5", which allows irq5 to be devoted to "legacy isa devices" (whatever that means). I tried turning this on, and using isa interrupts - this didn't work either.

Next-in-Thread Next Message

Select this message: didn't work

Messages Inline: 1 All Outline: 1 2 3

1. None Fixed... by David Hinds, 2000, Feb 18

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]