"3.1.8 can't figure out the interrupt routing"
lucent ieee turbo pci adapter (Bob Cohen)
3.1.8 can't figure out the interrupt routing (David Hinds)
|
I have the same problem with a lucent WaveLan IEEE and a CL 6729 PCI Controller. I can access the card, but no interrupts are coming thru. The lspci shows that
"pin A routed to IRQ 11" but I am not able to set anything to irq 11. When I don't specify an irq, the irq of the wvlan_cs driver is set to 5 and no irq is comming thru (/proc/interrupts shows 0). What are the correct irq that the wvlan_cs driver should use, how can I debug this problem further? Thanks for any help Gerald
|
Messages
Outline:
This is a somewhat rare configuration by David Hinds, 2000, Feb 18
RE: This is a somewhat rare configuration by Gerald Richter, 2000, Feb 18
It's true for most bridges like this by David Hinds, 2000, Feb 18
to:
