"3.1.8 can't figure out the interrupt routing"

Forum: PCMCIA Wireless Network Adapter Issues
Re:

lucent ieee turbo pci adapter (Bob Cohen)
Re:

3.1.8 can't figure out the interrupt routing (David Hinds)
Date: 2000, Feb 18
From: Gerald Richter richter

I have the same problem with a lucent WaveLan IEEE and a CL 6729 PCI Controller. I can access the card, but no interrupts are coming thru. The lspci shows that
"pin A routed to IRQ 11"
but I am not able to set anything to irq 11. When I don't specify an irq, the irq of the wvlan_cs driver is set to 5 and no irq is comming thru (/proc/interrupts shows 0).
What are the correct irq that the wvlan_cs driver should use, how can I debug this problem further?
Thanks for any help
Gerald

Select this message: "3.1.8 can't figure out the interrupt routing"

Messages Inline: Outline:

1. This is a somewhat rare configuration by David Hinds, 2000, Feb 18
(_ RE: This is a somewhat rare configuration by Gerald Richter, 2000, Feb 18
(_ It's true for most bridges like this by David Hinds, 2000, Feb 18

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Edit This Forum ]