Question: "3.1.8 can't figure out the interrupt routing"  

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question: lucent ieee turbo pci adapter (Bob Cohen)
Re: 3.1.8 can't figure out the interrupt routing (David Hinds)
Date: 2000, Feb 18
From: Gerald Richter richter

I have the same problem with a lucent WaveLan IEEE and a CL 6729 PCI Controller. I can access the card, but no interrupts are coming thru. The lspci shows that "pin A routed to IRQ 11" but I am not able to set anything to irq 11. When I don't specify an irq, the irq of the wvlan_cs driver is set to 5 and no irq is comming thru (/proc/interrupts shows 0). What are the correct irq that the wvlan_cs driver should use, how can I debug this problem further? Thanks for any help Gerald

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. This is a somewhat rare configuration by David Hinds, 2000, Feb 18

(_ RE: This is a somewhat rare configuration by Gerald Richter, 2000, Feb 18

(_ It's true for most bridges like this by David Hinds, 2000, Feb 18

[ Add Message ]  to: ""3.1.8 can't figure out the interrupt routing" "

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]