Next-in-Thread Next Message

More pcmcia startup 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question lucent ieee turbo pci adapter (Bob Cohen)
Re: Feedback same problem for me! (Guillaum Dallaire)
Re: None PCI interrupt routing? (David Hinds)
Date: 2000, Mar 30
From: Guillaum Dallaire gd

Hi,

Here is the log :

ar 27 14:09:33 localhost pcmcia: Starting PCMCIA services:

Mar 27 14:09:34 localhost pcmcia:  modules
Mar 27 14:09:34 localhost kernel: Linux PCMCIA Card Services 3.1.13 
Mar 27 14:09:34 localhost kernel:   kernel build: 2.2.14 #4 SMP lun mar 13 05:09:51 EST 2000 
Mar 27 14:09:34 localhost kernel:   options:  [pci] [cardbus] 
Mar 27 14:09:34 localhost kernel: PCI routing table version 1.0 at 0xf0b40 
Mar 27 14:09:34 localhost kernel:   unknown PCI interrupt router 10b9:1533 
Mar 27 14:09:34 localhost kernel: Intel PCIC probe:  
Mar 27 14:09:34 localhost kernel:   TI 1225 PCI-to-CardBus at slot 00:0a, mem 0x68000000 
Mar 27 14:09:34 localhost kernel:     host opts [0]: [isa irq] [no pci irq] [lat 32/176] [bus 32/34] 
Mar 27 14:09:34 localhost kernel:     host opts [1]: [isa irq] [no pci irq] [lat 32/176] [bus 35/37] 
Mar 27 14:09:34 localhost kernel:     ISA irqs (default) = 3,4,5,7,9,11,12,15 polling interval = 1000 ms 
Mar 27 14:09:34 localhost pcmcia:  cardmgr.
Mar 27 14:09:34 localhost rc: Starting pcmcia succeeded
Mar 27 14:09:34 localhost cardmgr[343]: starting, version is 3.1.13
Mar 27 14:09:34 localhost cardmgr[343]: watching 2 sockets
Mar 27 14:09:34 localhost kernel: cs: IO port probe 0x1000-0x17ff: clean. 
Mar 27 14:09:34 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x290-0x297 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 
Mar 27 14:09:34 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Mar 27 14:09:34 localhost cardmgr[343]: initializing socket 0
Mar 27 14:09:34 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
Mar 27 14:09:34 localhost cardmgr[343]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter
Mar 27 14:09:34 localhost cardmgr[343]: executing: 'insmod /lib/modules/2.2.14/pcmcia/wvlan_cs.o port_type=3 channel=3 station_name=dev-1'
Mar 27 14:09:34 localhost kernel: wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.4 
Mar 27 14:09:34 localhost kernel: wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de> 
Mar 27 14:09:35 localhost kernel: wvlan_cs: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f 
Mar 27 14:09:35 localhost kernel: wvlan_cs: Registered netdevice wvlan0 
Mar 27 14:09:35 localhost kernel: wvlan_cs: Valid channels: 1 2 3 4 5 6 7 8 9 10 11  
Mar 27 14:09:35 localhost kernel: wvlan_cs: MAC address on wvlan0 is 00 60 1d 03 8a df  
Mar 27 14:09:35 localhost cardmgr[343]: executing: './network start wvlan0'
Mar 27 14:09:35 localhost cardmgr[343]: initializing socket 1
Mar 27 14:09:35 localhost cardmgr[343]: socket 1: Anonymous Memory
Mar 27 14:09:36 localhost cardmgr[343]: executing: 'insmod /lib/modules/2.2.14/pcmcia/memory_cs.o'
Mar 27 14:09:36 localhost kernel: memory_cs: mem0: anonymous: unknown size 
Mar 27 14:09:36 localhost cardmgr[343]: executing: './memory start mem0'

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 2 3

None The "unknown interrupt router" problem

Re: More pcmcia startup (Guillaum Dallaire)
Date: 2000, Mar 30
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> Mar 27 14:09:34 localhost kernel: PCI routing table version 1.0 at 0xf0b40 
> Mar 27 14:09:34 localhost kernel:   unknown PCI interrupt router 10b9:1533 

This is the crucial "bad thing".  This adapter card uses a PCI
interrupt to communicate with the system.  The Linux kernel does not
know how to deduce the interrupt routing for your host bridge, which
appears to be an Acer M1533.  Without that information, the drivers
report "no pci irq", and can't set up interrupt handling correctly.

I've contacted Acer to find out if I can get a datasheet for this host
bridge.

-- Dave
pcmcia startup


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]