hi.
i am trying to get my lucent wavelan ieee silver pcmcia card
work with my lucent pci/pcmcia expansion card. i have read
this board, and tried various things but still have transmit
timeouts and ridiculously long ping times (> 4 seconds).
setup: redhat 6.2, kernel 2.2.14, pcmcia 3.1.18
2-way SMP PIII
i have tried the following:
using the wvlan_cs driver:
PCIC_OPTS="irq_list=11"
# works but with poor ping times. i had to specify only the
# single irq for it to work at all
using the wavelan2_cs lucent driver:
PCIC_OPTS="cb_pci_irq=11"
# doesn't work, option not recognized (i saw this on the board somewhere)
PCIC_OPTS="irq_list=11"
# slow pings and timeouts
PCIC_OPTS="irq_mode=0"
# can't find pci irq: e.g. host opts [0]:... [no pci irq]
PCIC_OPTS="pci_irq_list=11 irq_mode=0"
# gives: host opts [0]:... [pci irq 11]
# but still get: wavelan2_cs: RequestIRQ: Resource in use
PCIC_OPTS="pci_irq_list=11,11 irq_mode=0"
# as in previous case
i have also seen my computer lock up using the
PCIC_OPTS="irq_list=11" and the lucent driver...
any ideas?
thanks,
doug
---------------------
some other output:
bermuda% cat /proc/interrupts
CPU0 CPU1
0: 350442 335519 IO-APIC-edge timer
1: 5573 5662 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
12: 28942 30998 IO-APIC-edge PS/2 Mouse
13: 1 0 XT-PIC fpu
14: 13276 10843 IO-APIC-edge ide0
19: 6333 6444 IO-APIC-level aic7xxx, aic7xxx
21: 3520 3551 IO-APIC-level Intel EtherExpress Pro 10/100 Ethernet
NMI: 0
ERR: 0
|
Messages