Next-in-Thread Next Message

None Need more information 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Sad Lucent PCI/PCMCIA adapter + Wavelan IEEE silver (Douglas S. J. De Couto)
Date: 2000, Jul 13
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

> PCIC_OPTS="cb_pci_irq=11" 

The cb_pci_irq parameter goes in CORE_OPTS.

> PCIC_OPTS="pci_irq_list=11,11 irq_mode=0"

I think I need to see the startup messages from the PCMCIA modules
with no special PCIC_OPTS or CORE_OPTS settings.  I would also want to
see the output of the "dump_pirq" script from the debug-tools
directory.

Are you just guessing that this card's PCI interrupt is hooked up to
irq 11?

-- Dave

Next-in-Thread Next Message

Messages Inline: 0 1

More more info.

Re: None Need more information (David Hinds)
Date: 2000, Jul 13
From: Douglas S. J. De Couto decouto 

hi,

here is some more output and information.  i also wanted to
say thanks for having such good and extensive documentation.  

fyi, by ``long ping times'' in my previous message, i meant
~4000 milliseconds or failure when pinging another wavelan.

i also had tx timeouts with a pcmcia ethernet card using the gpl driver.

here are messages from `pcmcia start' and no pcmcia card
inserted.  there are no options set in config.opts for 
CORE_OPTS or PCIC_OPTS, and i am using the lucent driver:


Jul 13 16:15:12 bermuda kernel: Linux PCMCIA Card Services 3.1.18 
Jul 13 16:15:12 bermuda kernel:   kernel build: 2.2.14 #10 SMP Wed Apr 19 16:07:14 EDT 2000 
Jul 13 16:15:12 bermuda kernel:   options:  [pci] [cardbus] [pnp] 
Jul 13 16:15:12 bermuda kernel: PCI routing table version 1.0 at 0xfdf00 
Jul 13 16:15:12 bermuda kernel: PnP: PNP BIOS installation structure at 0xc00f6cd0 
Jul 13 16:15:12 bermuda kernel: PnP: PNP BIOS version 1.0, entry at f0000:a89e, dseg at 400 
Jul 13 16:15:12 bermuda kernel: Intel PCIC probe:  
Jul 13 16:15:12 bermuda kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 00:0b, mem 0x68000000 
Jul 13 16:15:12 bermuda kernel:     host opts [0]: [isa irq] [no pci irq] [lat 168/176] [bus 32/34] 
Jul 13 16:15:12 bermuda kernel:     host opts [1]: [isa irq] [no pci irq] [lat 168/176] [bus 35/37] 
Jul 13 16:15:12 bermuda kernel:     ISA irqs (default) = 5,9,10,11,15 polling interval = 1000 ms 
Jul 13 16:15:12 bermuda cardmgr[2716]: starting, version is 3.1.18
Jul 13 16:15:12 bermuda cardmgr[2716]: watching 2 sockets
Jul 13 16:15:12 bermuda kernel: cs: IO port probe 0x1000-0x13ff: clean. 
Jul 13 16:15:12 bermuda kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 
Jul 13 16:15:12 bermuda kernel: cs: IO port probe 0x0a00-0x0aff: clean. 


and inserting the wavelan card (pcmcia.opts set to use dhcp):

Jul 13 16:16:23 bermuda cardmgr[2716]: initializing socket 0
Jul 13 16:16:23 bermuda cardmgr[2716]: socket 0: Lucent Technologies WaveLAN/IEEE
Jul 13 16:16:23 bermuda kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
Jul 13 16:16:23 bermuda cardmgr[2716]: executing: 'modprobe wavelan2_cs network_name=Chaos'
Jul 13 16:16:23 bermuda kernel: eth1: WaveLAN/IEEE, io_addr 0x100, irq 9, mac_address 00:60:1D:23:A7:21 
Jul 13 16:16:23 bermuda cardmgr[2716]: executing: './network start eth1'
Jul 13 16:16:23 bermuda pumpd[2734]: starting at Thu Jul 13 16:16:23 2000  
Jul 13 16:16:30 bermuda kernel: eth1: Transmit timeout. 
Jul 13 16:17:01 bermuda last message repeated 3 times
Jul 13 16:17:11 bermuda kernel: eth1: Transmit timeout. 
Jul 13 16:17:20 bermuda sshd[448]: log: Generating new 768 bit RSA key.
Jul 13 16:17:20 bermuda sshd[448]: log: RSA key generation complete.
Jul 13 16:17:21 bermuda kernel: eth1: Transmit timeout. 
Jul 13 16:17:23 bermuda cardmgr[2716]: + Operation failed.


and now removing the card:

Jul 13 16:18:34 bermuda kernel: alloc_skb called nonatomically from interrupt c0160937 
Jul 13 16:18:34 bermuda cardmgr[2716]: shutting down socket 0
Jul 13 16:18:34 bermuda cardmgr[2716]: executing: './network stop eth1'
Jul 13 16:18:34 bermuda cardmgr[2716]: + eth1: error fetching interface information: Device not found
Jul 13 16:18:34 bermuda cardmgr[2716]: + Operation failed.
Jul 13 16:18:34 bermuda cardmgr[2716]: + eth1: unknown interface: No such device
Jul 13 16:18:34 bermuda cardmgr[2716]: executing: 'modprobe -r wavelan2_cs'
Jul 13 16:18:34 bermuda cardmgr[2716]: + ds: Device or resource busy

and now executing `pcmcia stop':

Jul 13 16:19:30 bermuda cardmgr[2716]: exiting
Jul 13 16:19:30 bermuda kernel: unloading PCMCIA Card Services 

______________________________________________________________

here is the dump_pirq output:

Interrupt routing table found at address 0xfdf00:
  Version 1.0, size 0x00e0
  Interrupt router is device 00:12.0
  PCI exclusive interrupt mask: 0x0000
  Compatible router: vendor 0x8086 device 0x122e

Device 00:10.0 (slot 1):
  INTA: link 0x60, irq mask 0xdcb8
  INTB: link 0x65, irq mask 0xdcb8
  INTC: link 0x66, irq mask 0xdcb8
  INTD: link 0x67, irq mask 0xdcb8

Device 00:0d.0 (slot 2):
  INTA: link 0x61, irq mask 0xdcb8
  INTB: link 0x66, irq mask 0xdcb8
  INTC: link 0x67, irq mask 0xdcb8
  INTD: link 0x65, irq mask 0xdcb8

Device 00:0c.0 (slot 0):
  INTA: link 0x63, irq mask 0xdcb8
  INTB: link 0x63, irq mask 0xdcb8

Device 00:0b.0 (slot 3):
  INTA: link 0x62, irq mask 0xdcb8
  INTB: link 0x67, irq mask 0xdcb8
  INTC: link 0x65, irq mask 0xdcb8
  INTD: link 0x66, irq mask 0xdcb8

Device 00:0e.0 (slot 0):
  INTA: link 0x65, irq mask 0xdcb8

Device 00:09.0 (slot 4):
  INTA: link 0x63, irq mask 0xdcb8
  INTB: link 0x65, irq mask 0xdcb8
  INTC: link 0x66, irq mask 0xdcb8
  INTD: link 0x67, irq mask 0xdcb8

Device 00:12.0 (slot 0):
  INTD: link 0x65, irq mask 0xdcb8

Device 00:14.0 (slot 0):

Device 00:01.0 (slot 0):
  INTA: link 0x65, irq mask 0xdcb8
  INTB: link 0x66, irq mask 0xdcb8
  INTC: link 0x67, irq mask 0xdcb8
  INTD: link 0x64, irq mask 0xdcb8

Device 00:0f.0 (slot 0):
  INTA: link 0x65, irq mask 0xdcb8
  INTB: link 0x66, irq mask 0xdcb8
  INTC: link 0x67, irq mask 0xdcb8
  INTD: link 0x64, irq mask 0xdcb8

Device ff:04.0 (slot 5):
  INTA: link 0x64, irq mask 0xdcb8
  INTB: link 0x65, irq mask 0xdcb8
  INTC: link 0x66, irq mask 0xdcb8
  INTD: link 0x67, irq mask 0xdcb8

Device ff:07.0 (slot 6):
  INTA: link 0x67, irq mask 0xdcb8
  INTB: link 0x64, irq mask 0xdcb8
  INTC: link 0x65, irq mask 0xdcb8
  INTD: link 0x66, irq mask 0xdcb8

Interrupt router at 00:12.0: Intel 82371AB PIIX4/PIIX4E PCI-to-ISA bridge
  PIRQ1 (link 0x60): unrouted
  PIRQ2 (link 0x61): unrouted
  PIRQ3 (link 0x62): unrouted
  PIRQ4 (link 0x63): unrouted
  Serial IRQ: [disabled] [quiet] [frame=21] [pulse=4]

_____________________
end of message

None Strange interrupt routing information

Re: More more info. (Douglas S. J. De Couto)
Date: 2000, Jul 13
From: David Hinds <dhinds@pcmcia.sourceforge.org> 

Your interrupt routing table looks pretty strange to me.  I'd try:

   CORE_OPTS="cb_pci_irq=11"
   PCIC_OPTS="irq_mode=0"

and see how that works.  Maybe try different values in place of 11.
The thing I don't understand is why your dump_pirq output shows all
PCI interrupt pins as "unrouted":

> Interrupt router at 00:12.0: Intel 82371AB PIIX4/PIIX4E PCI-to-ISA bridge
>   PIRQ1 (link 0x60): unrouted
>   PIRQ2 (link 0x61): unrouted
>   PIRQ3 (link 0x62): unrouted
>   PIRQ4 (link 0x63): unrouted
>   Serial IRQ: [disabled] [quiet] [frame=21] [pulse=4]

This makes me think my suggestion is unlikely to work, because PCI
interrupts are not being routed in a way that I understand.

But this is an SMP box so maybe this is an IO APIC issue, and the
interrupt routing table doesn't apply.  In that case this is over my
head: maybe contact Martin Mares <mj@ucw.cz> and ask him how to figure
out or fix the interrupt assignment for a PCI device on an SMP box
when the BIOS doesn't fill in the PCI interrupt line register.  He may
tell you that this combination won't work with a 2.2 kernel.

-- Dave

None not working still

Re: None Strange interrupt routing information (David Hinds)
Date: 2000, Jul 13
From: Douglas S. J. De Couto decouto 

hi,  tried your suggestion for new options in config.opts, but 
no good.  i have tried PCIC_OPTS="irq_mode=0" and 
CORE_OPTS="cb_pci_irq=n" for n in 3,..,15, but it only ever 
tries 11, unsuccessfully.  here are the log messages.  i will 
follow up on your suggestion and contact Martin.  Thanks.

-------------------------------

Jul 13 18:44:36 bermuda kernel: Linux PCMCIA Card Services 3.1.18 
Jul 13 18:44:36 bermuda kernel:   kernel build: 2.2.14 #10 SMP Wed Apr 19 16:07:14 EDT 2000 
Jul 13 18:44:36 bermuda kernel:   options:  [pci] [cardbus] [pnp] 
Jul 13 18:44:36 bermuda kernel: PCI routing table version 1.0 at 0xfdf00 
Jul 13 18:44:36 bermuda kernel: PnP: PNP BIOS installation structure at 0xc00f6cd0 
Jul 13 18:44:36 bermuda kernel: PnP: PNP BIOS version 1.0, entry at f0000:a89e, dseg at 400 
Jul 13 18:44:36 bermuda kernel: Intel PCIC probe:  
Jul 13 18:44:36 bermuda kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 00:0b, mem 0x68000000 
Jul 13 18:44:36 bermuda kernel:     host opts [0]: [pci only] [pci irq 11] [lat 168/176] [bus 32/34] 
Jul 13 18:44:36 bermuda kernel:     host opts [1]: [pci only] [pci irq 11] [lat 168/176] [bus 35/37] 
Jul 13 18:44:36 bermuda kernel:     PCI irq 11 test failed 
Jul 13 18:44:36 bermuda kernel:     *NO* card interrupts, polling interval = 1000 ms 
Jul 13 18:44:36 bermuda cardmgr[3829]: starting, version is 3.1.18
Jul 13 18:44:36 bermuda cardmgr[3829]: watching 2 sockets
Jul 13 18:44:36 bermuda kernel: cs: IO port probe 0x1000-0x13ff: clean. 
Jul 13 18:44:36 bermuda kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 
Jul 13 18:44:36 bermuda kernel: cs: IO port probe 0x0a00-0x0aff: clean. 
Jul 13 18:44:37 bermuda cardmgr[3829]: initializing socket 0
Jul 13 18:44:37 bermuda cardmgr[3829]: socket 0: Lucent Technologies WaveLAN/IEEE
Jul 13 18:44:37 bermuda kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. 
Jul 13 18:44:37 bermuda cardmgr[3829]: executing: 'modprobe wavelan2_cs network_name=Chaos'
Jul 13 18:44:37 bermuda kernel: wavelan2_cs: RequestIRQ: Resource in use 
Jul 13 18:44:38 bermuda cardmgr[3829]: get dev info on socket 0 failed: Resource temporarily unavailable
Need more information

Add Message to: "Need more information"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10