No interrupt routing table 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Sad: Lucent PCI/PCMCIA adapter + Wavelan IEEE silver (Douglas S. J. De Couto)
Re: Question: same problems on single processor (Douglas S. J. De Couto)
Date: 2000, Jul 17
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> No PCI interrupt routing table was found. Well, that's bad. That means we don't know which PCI devices are connected to which PCI interrupt (PIRQ) pins: > Interrupt router at 00:07.0: Intel 82371SB PIIX3 PCI-to-ISA bridge > PIRQ1 (link 0x60): unrouted > PIRQ2 (link 0x61): irq 10 > PIRQ3 (link 0x62): irq 11 > PIRQ4 (link 0x63): unrouted What I would do is to first try setting: PCIC_OPTS="pci_irq_list=10,10" and see if that works. If not, try 11,11. If that also fails, then try moving the adapter to another PCI bus slot and repeat the tests. -- Dave

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Re: No interrupt routing table by Douglas S. J. De Couto, 2000, Jul 18

(_ Oops, I left out something important by David Hinds, 2000, Jul 18

(_ Re: Oops, I left out something important by Douglas S. J. De Couto, 2000, Jul 20

[ Add Message ]  to: "No interrupt routing table"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]