Next-in-Thread Next Message

None No interrupt routing table

Re: Question same problems on single processor (Douglas S. J. De Couto)
Date: 2000, Jul 17
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> No PCI interrupt routing table was found.

Well, that's bad.  That means we don't know which PCI devices are
connected to which PCI interrupt (PIRQ) pins:

> Interrupt router at 00:07.0: Intel 82371SB PIIX3 PCI-to-ISA bridge
>   PIRQ1 (link 0x60): unrouted
>   PIRQ2 (link 0x61): irq 10
>   PIRQ3 (link 0x62): irq 11
>   PIRQ4 (link 0x63): unrouted

What I would do is to first try setting:

    PCIC_OPTS="pci_irq_list=10,10"

and see if that works.  If not, try 11,11.  If that also fails, then
try moving the adapter to another PCI bus slot and repeat the tests.

-- Dave

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 3

1. None Re: No interrupt routing table by Douglas S. J. De Couto, 2000, Jul 18
(_ None Oops, I left out something important by David Hinds, 2000, Jul 18
(_ None Re: Oops, I left out something important by Douglas S. J. De Couto, 2000, Jul 20

Add Message to: "No interrupt routing table"

Members Subscribe Admin Mode No Frames New Base Frame Help for HyperNews at pcmcia-cs.sourceforge.net 1.10