Re: No interrupt routing table 
Lucent PCI/PCMCIA adapter + Wavelan IEEE silver (Douglas S. J. De Couto)
same problems on single processor (Douglas S. J. De Couto)
No interrupt routing table (David Hinds)
> > No PCI interrupt routing table was found. > > Well, that's bad. That means we don't know which PCI devices are > connected to which PCI interrupt (PIRQ) pins: > > > Interrupt router at 00:07.0: Intel 82371SB PIIX3 PCI-to-ISA bridge > > PIRQ1 (link 0x60): unrouted > > PIRQ2 (link 0x61): irq 10 > > PIRQ3 (link 0x62): irq 11 > > PIRQ4 (link 0x63): unrouted > > What I would do is to first try setting: > > PCIC_OPTS="pci_irq_list=10,10" > > and see if that works. If not, try 11,11. If that also fails, then > try moving the adapter to another PCI bus slot and repeat the tests. > > -- Dave thanks for the new info. unfortunately i have tried the card in every pci slot, with each permutation of PCIC_OPTS="", PCIC_OPTS="pci_irq_list=10,10", and PCIC_OPTS="pci_irq_list=11,11", and i still get Tx timeouts from the card. Where does the trouble lie? Is it that the PCI/PCMICA bridge doesn't correctly interface with PCI (because all my other devices are working!)? thanks for your help d -- Douglas S. J. De Couto decouto@lcs.mit.edu |
Messages
Outline:
Oops, I left out something important by David Hinds, 2000, Jul 18
Re: Oops, I left out something important by Douglas S. J. De Couto, 2000, Jul 20
to:
