I am having some trouble getting my WebGear Aviator 2.4 PCMCIA card working under linux. It is running perfectly on my two laptops running Windows 98SE, but I cannot get it to work on my firewall (ie desktop machine with the supplied ISA card).
I am runnning RedHat 6.1, with kernel 2.2.16 and pcmcia-cs-3.1.18
I have had this working in the past, but that was with less other network cards and with pcmcia-cs-3.1.15. The server now has 3 wired network cards in it, all working (smc-ultra, 3c509 and ne).
but when I do a /etc/rc.d/init.d/pcmcia start /sbin/ifconfig seems to be ok eth3 Link encap:Ethernet HWaddr FF:00:FF:48:FF:B3 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:5
but cat /proc/ray_cs says Card doing acquisition and never Acquisition complete like it did in the past, and neither of my Win 98 laptops can access the server. Raylink Wireless LAN driver status ray_cs.c,v 1.19 2000/06/05 23:00:51 root Exp - Corey Thomas firstname.lastname@example.org Firmware version = 4 - Use dump_cis for more details Adhoc network ESSID = "RALPHHOME" BSSID = 00:00:00:00:00:00 Country code = 1 Card status = Card doing acquisition Framing mode = Encapsulation Last pkt signal lvl = 0 No beacons received
I modified the configuration files for pcmcia in the following way
config.opts module "ray_cs" opts "essid=XXXXXX translate=0 pc_debug=3"
network.opts IPADDR="192.168.1.1" NETMASK="255.255.255.0" NETWORK="192.168.1.0" BROADCAST="192.168.1.255" GATEWAY="192.168.1.1"
wireless.opts *,*,FF:00:FF:48:FF:B3,*) INFO="Raylink/Aviator2.4 example (Aviator default ad-hoc setting)" ESSID="XXXXXX" MODE="Ad-Hoc" RATE="auto" IWPRIV="set_framing 0" ;;