|
when I run test_network I get the following
PCMCIA network settings are coming from /etc/pcmcia/network.opts. /etc/sysconfig/network-scripts/ifcfg-eth0 also exists?? Checking network interface eth3 (ray_cs driver):
Current ifconfig settings:
eth3 Link encap:Ethernet HWaddr FF:00:FF:48:FF:B3
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:83 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:5
The interface is configured and running. TX looks ok, but there seems to be an RX problem.
You have not configured a gateway or default route.
Enter a numeric IP address to ping: 192.168.1.1
Pinging 192.168.1.1 ... response received! The device interrupt does not seem to be incrementing normally. What does this mean?
|