Next-in-Thread Next Message

More does HCF_ERR_NO_NIC mean bad hardware? 

Forum: PCMCIA Wireless Network Adapter Issues
Re: None wvlan_cs fails on startup with "Resource temporarily unavailable" (Bob Cook)
Date: 2000, Jul 26
From: Bob Cook bcook

Thanks to Dave Hind for the suggestion for my previous problem (I had conflicting information in my config files). That change now allows me to get the wvlan_cs driver started although it still won't initialize properly.

In wvlan_hcfio.c, the hcfio_string() function, on line ~346 there is a test of memory. Specifically there is a test at the ioport+0x28 for the bytes 0x7d37.

This test fails on my setup. It finds either 0xFFFF (on the first attempt) or 0x0000 on successive attempts.

I'm suspicious of believing the pcmcia card is faulty because I've gotten it to successfully initialize under Win98 and in a Mac. I don't have a way to verify my ISA bridge, but it seems to function ok because the card insertion is detected and recognizied.

By the way, I should mention that I'm running this on an old 486 box. This shouldn't make any difference but I wonder about bus speeds (its an AT bus) or something. I don't know enough about this sort of thing to be knowledgable but I'm certain I'm not the first to try this sort of thing and I can't seem to find references of anyone else having such problems.

TIA for any assistance or suggestions.

Next-in-Thread Next Message

Select this message: does HCF_ERR_NO_NIC mean bad hardware?

Messages Inline: 1 All Outline: 1 2 All

1. None A shot in the dark by David Hinds, 2000, Jul 26
(_ Feedback No luck... Where can I get details about the WaveLAN? by Bob Cook, 2000, Jul 28
(_ More On Andy's page... by Jean Tourrilhes, 2000, Jul 29
(_ Question Some questions about your message by Bob Cook, 2000, Jul 29
1. Sad Hum... by Jean Tourrilhes, 2000, Jul 31
2. None The PCI->PCMCIA adapters are the tricky ones by David Hinds, 2000, Jul 31

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]