Next-in-Thread Next Message

Question Problem with Wavelan Turbo 11Mbps 

Forum: PCMCIA Wireless Network Adapter Issues
Date: 2000, Jul 31
From: Alex Lam <alex.lam@radiata.com>

Hi There,

I am using a desktop with the PCI adapter + Kernel 2.2.16 + PCMCIA-3.1.19 + wvlan_cs driver and I am problem sending
data out using the wvlan0 interface. The interface is there
and it responds to iwconfig. However, when I send data
through it, the led doesn't blink at all. 

This is what I get when I type iwconfig

wvlan0    IEEE 802.11-DS  ESSID:"any"  Nickname:"gileswave"
          Frequency:2.422GHz  Sensitivity:1/3  Mode:Ad-Hoc  
          Access Point: 00:00:00:00:00:00
          Bit Rate=11Mb/s   RTS thr:off   Fragment thr:off   
          Encryption key:off
          Power Management:off
          Link quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

Can you see anything wrong ?

And when I try to ping another machine with the same configuration, I get the following.

PING willowwave.radiata.com (10.200.20.11) from 10.200.20.10 : 56(84) bytes of data.
From gileswave.radiata.com (10.200.20.10): Destination Host Unreachable

Any ideas ?
Thanks in advance.
Alex

Next-in-Thread Next Message

Select this message: Problem with Wavelan Turbo 11Mbps

Messages Inline: 1 All Outline: 1 2 All

1. More More info... by Alex Lam, 2000, Jul 31
1. Sad Timeout cause... by Jean Tourrilhes, 2000, Jul 31
2. None Sounds like an interrupt problem; need more messages by David Hinds, 2000, Jul 31
1. More Very similar problem here by Elliot Lee, 2000, Aug 02
... 4 Message(s)

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]