Your case is much easier 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Problem with Wavelan Turbo 11Mbps (Alex Lam)
Re: More info... (Alex Lam)
Re: Sounds like an interrupt problem; need more messages (David Hinds)
Re: Very similar problem here (Elliot Lee)
Date: 2000, Aug 03
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Your lspci output shows a PCI interrupt for the CardBus bridge. You just need to specify: PCIC_OPTS="irq_mode=0" to force the i82365 module to use only PCI interrupts. -- Dave

Messages Inline: Outline:

Nope. Re: Your case is much easier (David Hinds) Date: 2000, Aug 03 From: Elliot Lee sopwith

No go (I had already tried this while looking at back msgs). When starting up with irq_mode=0: Aug 2 21:27:14 test152 kernel: PCI routing table version 1.0 at 0xf0a90 Aug 2 21:27:14 test152 kernel: Intel PCIC probe: Aug 2 21:27:14 test152 kernel: TI 1225 rev 01 PCI-to-CardBus at slot 00:0b, mem 0x68000000 Aug 2 21:27:14 test152 kernel: host opts [0]: [pci only] [pci irq 10] [lat 32/176] [bus 32/34] Aug 2 21:27:14 test152 kernel: host opts [1]: [pci only] [pci irq 9] [lat 32/176] [bus 35/37] Aug 2 21:27:14 test152 kernel: PCI irq 10 test failed Aug 2 21:27:14 test152 kernel: *NO* card interrupts, polling interval = 1000 ms Aug 2 21:27:14 test152 cardmgr[747]: starting, version is 3.1.19 Aug 2 21:27:14 test152 cardmgr[747]: watching 2 sockets Aug 2 21:27:14 test152 kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff Aug 2 21:27:14 test152 kernel: cs: IO port probe 0x0800-0x08ff: clean. Aug 2 21:27:14 test152 kernel: cs: IO port probe 0x0200-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x290-0x297 0x330-0x337 0x388-0x38f 0x4d0-0x4d7 Aug 2 21:27:15 test152 cardmgr[747]: initializing socket 0 Aug 2 21:27:15 test152 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Aug 2 21:27:15 test152 cardmgr[747]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter Aug 2 21:27:15 test152 cardmgr[747]: product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", "" Aug 2 21:27:15 test152 cardmgr[747]: manfid: 0x0156, 0x0002 function: 6 (network) Aug 2 21:27:15 test152 cardmgr[747]: executing: 'modprobe wvlan_cs port_type=3 channel=1' Aug 2 21:27:15 test152 kernel: wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.4 Aug 2 21:27:15 test152 kernel: wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de> Aug 2 21:27:15 test152 kernel: wvlan_cs: RequestIRQ: Resource in use Dunno if it is relevant, but once I have started & stopped pcmcia with irq_mode=0, this error continues to happen subsequent times when I start pcmcia without rebooting.

1. Re: Sad: Nope. by David Hinds, 2000, Aug 03 (_ Yay! Works by Elliot Lee, 2000, Aug 03

[ Edit This Forum ]