Next-in-Thread Next Message

Sad Nope.

Re: None Your case is much easier (David Hinds)
Date: 2000, Aug 03
From: Elliot Lee sopwith

No go (I had already tried this while looking at back msgs).

When starting up with irq_mode=0:

Aug  2 21:27:14 test152 kernel: PCI routing table version 1.0 at 0xf0a90
Aug  2 21:27:14 test152 kernel: Intel PCIC probe: 
Aug  2 21:27:14 test152 kernel:   TI 1225 rev 01 PCI-to-CardBus at slot 00:0b, mem 0x68000000
Aug  2 21:27:14 test152 kernel:     host opts [0]: [pci only] [pci irq 10] [lat 32/176] [bus 32/34]
Aug  2 21:27:14 test152 kernel:     host opts [1]: [pci only] [pci irq 9] [lat 32/176] [bus 35/37]
Aug  2 21:27:14 test152 kernel:     PCI irq 10 test failed
Aug  2 21:27:14 test152 kernel:     *NO* card interrupts, polling interval = 1000 ms
Aug  2 21:27:14 test152 cardmgr[747]: starting, version is 3.1.19
Aug  2 21:27:14 test152 cardmgr[747]: watching 2 sockets
Aug  2 21:27:14 test152 kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Aug  2 21:27:14 test152 kernel: cs: IO port probe 0x0800-0x08ff: clean.
Aug  2 21:27:14 test152 kernel: cs: IO port probe 0x0200-0x04ff: excluding 0x200-0x207 0x220-0x22f 0x290-0x297 0x330-0x337 0x388-0x38f 0x4d0-0x4d7
Aug  2 21:27:15 test152 cardmgr[747]: initializing socket 0
Aug  2 21:27:15 test152 kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean.
Aug  2 21:27:15 test152 cardmgr[747]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter
Aug  2 21:27:15 test152 cardmgr[747]:   product info: "Lucent Technologies", "WaveLAN/IEEE", "Version 01.01", ""
Aug  2 21:27:15 test152 cardmgr[747]:   manfid: 0x0156, 0x0002  function: 6 (network)
Aug  2 21:27:15 test152 cardmgr[747]: executing: 'modprobe wvlan_cs port_type=3 channel=1'
Aug  2 21:27:15 test152 kernel: wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.4
Aug  2 21:27:15 test152 kernel: wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de>
Aug  2 21:27:15 test152 kernel: wvlan_cs: RequestIRQ: Resource in use

Dunno if it is relevant, but once I have started & stopped pcmcia with irq_mode=0, this error continues to happen subsequent times when I start pcmcia without rebooting.

Next-in-Thread Next Message

Select this message: Nope.

Messages Inline: 1 All Outline: 1 3 All

1. None Re: Sad: Nope. by David Hinds, 2000, Aug 03
(_ News Yay! Works by Elliot Lee, 2000, Aug 03

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode No Frames New Base Frame Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]