Next-in-Thread Next Message

None Strange IRQ info on NT 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question Interrupt problem with P60, WaveLAN/IEEE and TI-1221 (Sami Pitko)
Re: None Need to determine the PCI interrupt (David Hinds)
Date: 2000, Aug 03
From: Sami Pitko spitko

NT Diagnostic gives following information:

IRQ Device Bus Type
...
06 Floppy 0 Isa
10 WVLAN41 0 Internal
11 E100B 0 Pci
...

What surprises me is that WaveLAN interrupt is of type Internal (whatever it means?). Maybe there is some kind of driver to produce/process those interrupts in NT.

Is there a way to find the interrupt which TI-1221 is using on NT? At least "Administrative Tools/Windows NT Diagnostics" only gives IRQ for WaveLAN adapter and on the "Control Panel/PCMCIA" there is only memory area as a resource for PCMCIA Controller.

On the linux side:

If I set the WaveLAN to use IRQ 10, it doesn't work. All PCI interrupts are giving "PCI irq N test failed", unless I set do_scan=0.

I was able to get some pings through when I set it to use the same interrupt as eepro100 is using (IRQ 11), but the ping packets only went through when there were network traffic going on (== interrupts generated by) the eepro100...

Next-in-Thread Next Message

Select this message: Strange IRQ info on NT

Messages Inline: 1 All Outline: 1 3 All

1. None I think you are out of luck by David Hinds, 2000, Aug 05

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]