Next-in-Thread Next Message

Question Problem with Cabletron RoamAbout 

Forum: PCMCIA Wireless Network Adapter Issues
Date: 2000, Mar 21
From: Danilo Godec danci

I have linux 2.2.14 and pcmcia-cs-3.1.13. Everything seems to be just fine, 
modules load up, the wvlan0 interface is configured. 

But when I try to use the card (ping, telnet...), I get this message:

wvlan_cs: WMAC did not have sufficient RAM to build unsollicited frame! 

What should I check?

Thanks, Danilo

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 2 All

Sad WMAC did not have enough RAM to build unsollicited frame!

Re: Question Problem with Cabletron RoamAbout (Danilo Godec)
Date: 2000, Mar 23
From: Danilo Godec danci

When I start the pcmcia services, this is what I get (with RoamAbout card inserted):

Linux PCMCIA Card Services 3.1.13
  kernel build: 2.2.14 #2 Tue Mar 21 09:11:38 CET 2000
  options:  [pci] [cardbus]
PCI routing table version 1.0 at 0xfdf20
Intel PCIC probe:
  Vadem VG-469 ISA-to-PCMCIA at port 0x3e2 ofs 0x00
    host opts [0]: none
    host opts [1]: none
    ISA irqs (scanned) = 3,4,5,7,9,15 status change on irq 15
cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc3f 0xca0-0xca7 0xcf8-0xcff
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x4d0-0x4d7
cs: IO port probe 0x1000-0x17ff: excluding 0x1040-0x109f 0x1480-0x14ff
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.4
wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de>
wvlan_cs: index 0x01: Vcc 5.0, irq 5, io 0x0100-0x013f
wvlan_cs: Registered netdevice wvlan0
wvlan_cs: Valid channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
wvlan_cs: MAC address on wvlan0 is 00 60 6d 92 0d 00

Thw wvlan0 device gets configured (IP, etc.) but when I try to use it (ping, telnet, etc.), I get the message from the subject.

Could someone with a similar card (Lucent WaveLan, ...) check if his wvlan_cs messages are similar or am I missing something (memory region perhaps)?

Thanks, Danilo

1. Feedback Solved (sort of) by Danilo Godec, 2000, Mar 23

Ok Solved (for good, by Andy)

Re: Question Problem with Cabletron RoamAbout (Danilo Godec)
Date: 2000, Mar 29
From: Danilo Godec danci

Ok, Andy contacted me and explained, that this message is actually generated by the card itself and only reported by the driver. He also contacted folks at Lucent and they told him that this message it's HARMLESS (they even modified their driver to simply not report the message any more).

Thanks, folks!

   D.

Problem with Cabletron RoamAbout


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]