Next-in-Thread Next Message

Sad WMAC did not have enough RAM to build unsollicited frame! 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question Problem with Cabletron RoamAbout (Danilo Godec)
Date: 2000, Mar 23
From: Danilo Godec danci

When I start the pcmcia services, this is what I get (with RoamAbout card inserted):

Linux PCMCIA Card Services 3.1.13
  kernel build: 2.2.14 #2 Tue Mar 21 09:11:38 CET 2000
  options:  [pci] [cardbus]
PCI routing table version 1.0 at 0xfdf20
Intel PCIC probe:
  Vadem VG-469 ISA-to-PCMCIA at port 0x3e2 ofs 0x00
    host opts [0]: none
    host opts [1]: none
    ISA irqs (scanned) = 3,4,5,7,9,15 status change on irq 15
cs: IO port probe 0x0c00-0x0cff: excluding 0xc00-0xc3f 0xca0-0xca7 0xcf8-0xcff
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x37f 0x4d0-0x4d7
cs: IO port probe 0x1000-0x17ff: excluding 0x1040-0x109f 0x1480-0x14ff
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0x0d0000-0x0dffff: clean.
wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.4
wvlan_cs: (c) Andreas Neuhaus <>
wvlan_cs: index 0x01: Vcc 5.0, irq 5, io 0x0100-0x013f
wvlan_cs: Registered netdevice wvlan0
wvlan_cs: Valid channels: 1 2 3 4 5 6 7 8 9 10 11 12 13
wvlan_cs: MAC address on wvlan0 is 00 60 6d 92 0d 00

Thw wvlan0 device gets configured (IP, etc.) but when I try to use it (ping, telnet, etc.), I get the message from the subject.

Could someone with a similar card (Lucent WaveLan, ...) check if his wvlan_cs messages are similar or am I missing something (memory region perhaps)?

Thanks, Danilo

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. Feedback Solved (sort of) by Danilo Godec, 2000, Mar 23

Add Message to: "WMAC did not have enough RAM to build unsollicited frame!"

Members Subscribe Admin Mode Show Frames Help for HyperNews at 1.10