Next-in-Thread Next Message

None Not sure if it is an interrupt issue; gateway set wrong? 

Forum: PCMCIA Wireless Network Adapter Issues
Re: Question Receive interrupt does not seem to be incrementing properly (Richard Smith)
Re: None Some context would help (David Hinds)
Re: None Re: Some context would help (Richard A. Smith)
Date: 2000, Aug 15
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Does /proc/interrupts show a non-zero interrupt count for the card?
If the count is 0, then try using a different irq (by excluding things
in /etc/pcmcia/config.opts).

> There is a route to a gateway at 10.0.1.1

There's something wrong with your network settings and this is
confusing the script.  Your gateway address seems to be the same as
your own IP address, which doesn't make any sense.

> Pinging 10.0.1.1.... response received!
> The device interrupt does not seem to be incrementing normally.

In this context, I think this doesn't mean anything: it thinks it is
pinging your gateway, but it is pinging the box itself, which doesn't
cause any packets to go out through the card.  So it won't produce any
interrupts.

I'll add a test to the script to complain if the gateway address is
the same as the IP address.

-- Dave

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. None Re: Not sure if it is an interrupt issue; gateway set wrong? by Richard Smith, 2000, Aug 15
2. None Raylink problem solved.. by Richard Smith, 2000, Aug 15
1. None Configuration files by David Hinds, 2000, Aug 15

Add Message to: "Not sure if it is an interrupt issue; gateway set wrong?"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10