Not sure if it is an interrupt issue; gateway set wrong?

Forum: PCMCIA Wireless Network Adapter Issues
Re:

Receive interrupt does not seem to be incrementing properly (Richard Smith)
Re:

Some context would help (David Hinds)
Re:

Re: Some context would help (Richard A. Smith)
Date: 2000, Aug 15
From: David Hinds <dhinds@pcmcia.sourceforge.org>

Does /proc/interrupts show a non-zero interrupt count for the card? If the count is 0, then try using a different irq (by excluding things in /etc/pcmcia/config.opts). > There is a route to a gateway at 10.0.1.1 There's something wrong with your network settings and this is confusing the script. Your gateway address seems to be the same as your own IP address, which doesn't make any sense. > Pinging 10.0.1.1.... response received! > The device interrupt does not seem to be incrementing normally. In this context, I think this doesn't mean anything: it thinks it is pinging your gateway, but it is pinging the box itself, which doesn't cause any packets to go out through the card. So it won't produce any interrupts. I'll add a test to the script to complain if the gateway address is the same as the IP address. -- Dave

Select this message: Not sure if it is an interrupt issue; gateway set wrong?

Messages Inline: Outline:

1. Re: Not sure if it is an interrupt issue; gateway set wrong? by Richard Smith, 2000, Aug 15
2. Raylink problem solved.. by Richard Smith, 2000, Aug 15: 1. Configuration files by David Hinds, 2000, Aug 15

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

[ Edit This Forum ]