Use this page to discuss issues with Xircom ethernet cards. This includes the 16-bit cards (xirc2ps_cs driver) as well as the newer CardBus adapters (tulip_cb driver). Before posting, be sure you've checked any relevant sections of the PCMCIA-HOWTO, such as: Particularly useful bits of information to post include your laptop's make and model; the type(s) of card(s) you are using; and, of course, any relevant system log messages.


Messages Inline: [ 1 ]  [ All ]  Outline: [ 2 ]  [ 3 ]  [ All ] 

1. Question: CE3 and 100mbs only (the old story...) by Peter Schäfer, 1999, Oct 29
... 3 Message(s)
2. Note: CBEM56G by Chris Kees, 1999, Oct 29
... 3 Message(s)
3. More: IBM CardBus EtherJet saga continues.. by Paul Kronenwetter, 1999, Nov 03
... 6 Message(s)
4. Question: Experiences with the CEM56-100MD card? by Jason Arnold, 1999, Nov 04
... 1 Message(s)
5. Question: Problems with Kernel 2.2.13 and pcmcia 3.1.3 by Stefan Kapfhammer, 1999, Nov 04
... 4 Message(s)
6. Question: CEM-28 combo card stopped working.... by bboett@erm1.u-strasbg.fr, 1999, Nov 04
... 4 Message(s)
7. Question: How to turn off PM of PCMCIA? by Balu Nadiga, 1999, Nov 04
... 1 Message(s)
8. Warning: Machine freezes for 2-3 seconds on insertion of Xircom REM56G-100BTX by Bryce Nesbitt, 1999, Nov 05
... 3 Message(s)
9. Question: ISDN Xircom 10/100 mb ? by J.P, 1999, Nov 05
... 4 Message(s)
10. Question: RBEM56G asymmetrical transfer speeds by Ron Golan, 1999, Nov 08
... 2 Message(s)
11. Ok: Tosh Tecra 8000 with RBEM56-10/100BTX works with ToPIC97 at 32-Bit by Stefan Kapfhammer, 1999, Nov 15
... 1 Message(s)
12. Question: Problems with cs-3.1.4 and Kernel 2.2.13 by Stefan Kapfhammer, 1999, Nov 17
... 5 Message(s)
13. Question: Problem getting 100BaseT FDX on a REM56G-100 by Zaphod Beeblebrox, 1999, Nov 23
... 6 Message(s)
14. Question: eth0: RX drop,too much done by Mark Harvey, 1999, Nov 25
... 3 Message(s)
15. Ok: PCMCIA Modems (Xircom) and RedHat Linux 6.1 -- fixed by Atul Chitnis, 1999, Nov 28
... 1 Message(s)
16. Machine Lockup with high network traffic by Mark Harvey, 1999, Nov 29
... 5 Message(s)
17. Question: CBEM56G sleeps 'til a little nudge thru tcpdump(?!) by Kai Krebber, 1999, Nov 30
... 3 Message(s)
18. Question: RBEM56G-100: eth0: Transmit timed out by Bjoern Bayard, 1999, Nov 30
... 1 Message(s)
19. Warning: Xircom RealPort CardBuss Ethernet 10/100 + Modem 56 problem... by Cahlen Humphreys, 1999, Nov 30
21. Sad: IBM 10/100 EtherJet Cardbus by John Payne, 1999, Dec 01
... 7 Message(s)
22. Sad: Problem with T8000 and CBE 10/100 by Frederic FENOGLIETTO, 1999, Dec 03
... 3 Message(s)
23. Question: eth0 TIMED OUT with RBEM56G by Jean-Pierre Hermand, 1999, Dec 04
... 1 Message(s)
24. Sad: RBEM56G-100 & Tosibha 2655XDVD machines... whacky stuff by Eric Malkowski, 1999, Dec 05
... 1 Message(s)
25. Question: IRQ sharing and Xircom CardBus (RBEM56G-100BTX) by Anek Vorapanya, 1999, Dec 10
... 5 Message(s)
26. Question: Ethernet with Xircom CEMII? by Per von Zweigbergk, 1999, Dec 10
... 10 Message(s)
27. Question: REM56G-100 by Allen Khodabash, 1999, Dec 19
28. Intel EtherExpress Pro/100 Mobile 16-bit | kernel 2.2.13 | cardctl 3.1.3 by fuzz@catzero.net, 1999, Dec 22
... 2 Message(s)
29. Question: trouble unsuspending (RH 6.1, pcmcia 3.1.8, Xircom 10/100, IBM Thinkpad 770ED) by Jamie Zawinski, 1999, Dec 23
... 1 Message(s)
30. Question: Xircom 2CEps, tecra 8000, and RedHat 6.0 by Irene.A.Larko@grc.nasa.gov, 1999, Dec 30
... 1 Message(s)
31. Problem using CEM 56 with new pcmcia-cs-3.1.8 by TeeJin, 2000, Jan 11
... 1 Message(s)
33. Sad: REM56G-10BT: problems with the modem half by Jon Sundquist, 2000, Jan 13
34. Question: Problem with Intel EtherExpress 100 (16 bits) by Jean-Francois Gadoury, 2000, Jan 16
... 1 Message(s)
36. Question: Is RBEM56G 10/100 Ethernet + Modem 56 supported? by Stefan Kluth, 2000, Jan 26
... 6 Message(s)
37. Question: Xircom CEM-56-100, Linux 2.3.42, pcmcia-cs 3.1.10 by Ian G Batten, 2000, Feb 08
38. Question: Kernel oops when ejecting CBEM56G by Eyvind Bernhardsen, 2000, Feb 09
... 3 Message(s)
39. Question: CBEM56M at irq10/port1480 "modem is busy"... HELP! by Albert S. Johnston, 2000, Feb 09
... 2 Message(s)
40. Question: RBEM56G-100BTX Ethernet working; modem not recognized by RJ Johnston, 2000, Feb 10
... 2 Message(s)
41. Question: CE IIps Problems, Can anybody help ?? by Anton Enright, 2000, Feb 10
... 1 Message(s)
42. Question: ISDN problems CEM by J.P, 2000, Feb 12
... 2 Message(s)
43. Question: Problem with Xircom RE-100 on RH6.1 by Aaron Parks, 2000, Feb 20
... 1 Message(s)
44. Question: network not starting automatically? by Albert S. Johnston, 2000, Feb 24
... 7 Message(s)
45. Question: Dell I7500 with Xircom CBEM56G-100 - odd problem by Jakob Frandsen, 2000, Feb 25
... 2 Message(s)
46. Question: IBM PCMCIA Etherjet 10/100... lord help me. by GarrettSerack, 2000, Feb 28
... 1 Message(s)
47. Question: Redhat 6.0 and Xircom Realport 10/100TX by LaJchon McRight, 2000, Feb 29
... 4 Message(s)
48. Module Support for Xircom RealPort 2 by TeeJin, 2000, Mar 08
... 2 Message(s)
49. Feedback: Xircom Cardbus issues by James Morris, 2000, Mar 11
... 2 Message(s)
50. Problems with RBEM56G-100BTX Cardbus combo card by Jeff Key, 2000, Mar 16
... 4 Message(s)
51. Sad: Xircom RE-100 and ThinkPad 600x by Ron Ostiguy, 2000, Mar 18
... 2 Message(s)
52. Question: CEM56 with 3.1.11: only fullduplex?? by Andreas Gräf, 2000, Mar 20
53. Question: Xircom CE2 not identified on Toshiba 4030CDT by Tony Kerr, 2000, Mar 21
... 4 Message(s)
54. Question: Xircom CEM 56 on CPt 400 GT by GS, 2000, Mar 24
... 1 Message(s)
55. Question: On compaq laptop 1530..PCMCIA hangs and ETH0 Fail.xircom rbe100 cardbus by Johnny Page, 2000, Apr 04
... 1 Message(s)
56. Question: Where can I found Linux driver for CBEM+100BTX ? by Anthony BLONDEL, 2000, Apr 05
... 1 Message(s)
58. Question: RBE100, and insmod error by Dolapo Falola, 2000, Apr 06
... 9 Message(s)
59. Question: Xircom RBEM56G-100 stalls by Sebastien Bailard, 2000, Apr 12
... 2 Message(s)
60. Question: Intel vs. Xircom cardbus? by John Kilpatrick, 2000, Apr 13
61. Question: xircom combocard on dellI7500 by france haardt, 2000, Apr 13
63. Question: RealPort2 by Mike Barry, 2000, Apr 14
64. Sad: Presario 1210 / RE-100 / debian 2.2 / kernel 2.2.12 / pcmcia 3.1.8 by Preston Landers, 2000, Apr 18
... 1 Message(s)
65. Question: RBEM56G-100 problems with pcmcia 3.1.14 and kern 2.2.14 by Brad Langhorst, 2000, Apr 21
... 5 Message(s)
66. Question: Xircom CBE2BTX by Ram Prasad, 2000, Apr 30
67. Question: Xircom RealPort 10/100 and loading module twice? by Cody Pisto, 2000, May 01
... 3 Message(s)
68. Question: What should I buy: CardBus or PCMCIA? by Pieter Hollants, 2000, May 03
... 1 Message(s)
69. Question: RBEM56G-100 & Red Hat 6.2 by Marco A. Calamari, 2000, May 03
... 4 Message(s)
70. News: Xircom CardBus driver update by David Hinds, 2000, May 04
71. Question: Same linux kernel, but getting unresolved symbols with xirc2ps_cs.o by Tony Sciortino, 2000, May 11
... 1 Message(s)
72. Sad: RBEM56G-100BTX w/ RedHat Linux 6.2 by Mark Ambrose, 2000, May 13
... 7 Message(s)
73. Question: Xircom CBE-10/100BTX woes by Andrew Branch, 2000, May 14
... 1 Message(s)
74. Question: Trouble with Xircom 10/100 & IrDA (Thinkpad 390X) by Roberto Totaro, 2000, May 18
... 1 Message(s)
75. Ok: Success - RealPort2 10/100BTX by Tony Hoyle, 2000, May 18
76. Question: Problem with Xircom CE3-100BTX by Ralf Boettger, 2000, May 19
... 8 Message(s)
77. Question: RBEM100-56 and 3.0.14 compared to 3.1.x driver by Uwe Hahn, 2000, May 19
... 1 Message(s)
78. Sad: 10/100+56K (RBEM56G-100) initializes, looks good, but no traffic by Robert Harris, 2000, May 26
79. Question: Can anyone advise a newbie on getting RBEN56G working ? by Gordon Licence, 2000, Jun 03
... 3 Message(s)
80. Question: Xircom CEM56-100 not resuming by Andrew Pickin, 2000, Jun 05
... 1 Message(s)
81. Question: Xircom CBE2-10/100BTX Support by Nizar Ibrahim, 2000, Jun 07
... 3 Message(s)
82. Has anyone tested CBE2 with NEC VesaLite ? by TeeJin, 2000, Jun 09
... 1 Message(s)
83. Sad: Xircom CE3-10/100 Issue... by Heffer, 2000, Jun 11
... 2 Message(s)
85. Sad: RCBEM problems... Not detecting duplexing properly by Edward Spidre, 2000, Jun 12
86. Question: I have lot of problemas with an Intel Conmpatible Card (Mentor 10/100 PCMCIA Card) by Cesar Gonzalez, 2000, Jun 13
... 1 Message(s)
87. Question: 56k Modem Almost Working by Dannie Stanley, 2000, Jun 14
... 2 Message(s)
88. Question: Init Strings for Xircom RealPort GSM by Fabien, 2000, Jun 15
89. Ok: success with RealPort2 R2E by Mattias Amnefelt, 2000, Jun 17
90. Question: Promisc mode in redhat/mandrake network script? by kato, 2000, Jun 20
91. Note: Toshiba IPC5008A does not work(Including patch) by Junichiro Kita, 2000, Jun 22
... 2 Message(s)
92. Sad: Xircom RBEM56G 100 doesn't work in Linux Mandrake by Aishvarya Kr. Sharma, 2000, Jun 22
... 3 Message(s)
93. Question: Xircom Realport REM56G-10 on debian potato on a Dell Inspiron by Claudio HaMMeR, 2000, Jun 22
... 1 Message(s)
94. Question: Force full duplex on xirc2ps ? by Stefan Hoffmeister, 2000, Jun 23
95. Question: Status on the development of the driver for the RBE 10/100 BTX by Paulo E. Abreu, 2000, Jun 27
... 1 Message(s)
96. Question: Intermediate stalls with serial port at higher load (Xircom CEM56) by Andreas Stuebinger, 2000, Jun 27
97. News: Xircom CardBus CBEM56G 10/100 is working now...!!!!!!! by Nicolas Scheffer, 2000, Jun 28
... 1 Message(s)
98. RE-100 not init on startup by David Hammerton, 2000, Jul 04
... 3 Message(s)
99. Sad: RBE-100 freezes system on startup and insertion by Julian Smith, 2000, Jul 07
... 4 Message(s)
100. Sad: Problem installing a Xircom CBE2-100 on an IBM Thinkpad 1400 i-sries by Khalid HASSANI, 2000, Jul 08
... 1 Message(s)
101. Question: IBM T20 & Xircom RBE-100 by Brian Pavane, 2000, Jul 09
... 1 Message(s)
102. Sad: CBEM 10/100 recognized only if SCSI is inserted before by Christoph Blaue, 2000, Jul 10
... 3 Message(s)
103. Question: rbe-100, almost works by visnu pitiyanuvath, 2000, Jul 10
... 2 Message(s)
104. Question: Problems with serial on CEM56 by Pål Løberg, 2000, Jul 11
... 4 Message(s)
105. Ok: Xircom RealPort2 CardBus Ethernet 10/100 (R2BE-100BTX) by Ron Pinz, 2000, Jul 15
106. Question: pcmcia driver update by Ricardo Conde, 2000, Jul 18
107. Question: Xircom RealPort 10/100 with RedHat 6.2 by Thomas Dlouhy, 2000, Jul 28
... 2 Message(s)
108. Sad: Got CBEM56G-100 working (once), now cannot start pcmcia at all by Jason Pringle, 2000, Jul 28
... 4 Message(s)
109. Sad: RBEM56G-100BTX on HP Omnibook 4150 by Hester Van Rooyen, 2000, Jul 29
... 4 Message(s)
110. Question: Xircom R2E100 and Kernel Question ? by Leszek Szychowski, 2000, Aug 01
... 1 Message(s)
111. Sad: RBEM56G-100 Ethernet OK, Modem failing by Don Myroon, 2000, Aug 01
... 5 Message(s)
112. Question: Anything new on RBE-100 Problem? by Mathias de Riese, 2000, Aug 01
113. Question: New card: XE2000, doesn't work, what do I do? by Rob Landley, 2000, Aug 02
... 1 Message(s)
114. Question: Xircom re-100 and Linux 6 compared to 7.1 by Daniel Gericke, 2000, Aug 03
... 3 Message(s)
115. Question: How to install Xircom R2BE-100BTX Realport 2 (newbie Caldera 6.4) by Nicholas Graham, 2000, Aug 07
116. Sad: Xircom RealPort 10/100 RBEM56G-100 with RedHat 6.1 by Marco serra, 2000, Aug 18
... 1 Message(s)
117. Question: No network using Xircom RBEM56G-100 by Stuart Pedler, 2000, Aug 25
... 8 Message(s)
118. Angry: Frustrated newbie plees for help by Dan Yamauchi, 2000, Aug 28
119. Sad: RB100 - ping itself ok, ping outside no response, arp no h/w address by Alan Tam, 2000, Aug 28
... 3 Message(s)
120. Question: RBEM56G100 TX carrier errors on 100baseT network by Stefan Kluth, 2000, Sep 01
... 2 Message(s)
121. Question: CE3B-100BTX, a Dell Latitude XPiCD, and Mandrake 6 by kagenin@cyberspace.org, 2000, Sep 01
... 1 Message(s)
122. Question: XIRCOM by David Stephenson, 2000, Oct 13
123. Question: Xircom help with 10/100 using RH 6.2 by adacosta, 2000, Oct 25
124. Warning: VALinux and RBE-100 by Jeremy Welling, 2000, Nov 29
... 1 Message(s)

[ Add Message ]  to: "Xircom PCMCIA Ethernet Adapter Issues"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]