Next-in-Thread Next Message

None Re: Memory probe issue 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Sad CBEM 10/100 recognized only if SCSI is inserted before (Christoph Blaue)
Re: None Memory probe issue (David Hinds)
Date: 2000, Jul 11
From: Christoph Blaue cb

I tried this, but it does not work, I only found, that I get a warning in my
syslog 'no high memory space available!', when inserting the SCSI card. I have
excluded things to get the token ring adapter working.

here is a complete syslog from the start of my pcmcia services

----------------------------------------
1. start of pcmcia

Jul 11 10:04:51 lapcb kernel: Linux PCMCIA Card Services 3.1.11
Jul 11 10:04:51 lapcb kernel:   kernel build: 2.2.14 #1 Mon Mar 13 10:51:48 GMT 2000
Jul 11 10:04:51 lapcb kernel:   options:  [pci] [cardbus]
Jul 11 10:04:51 lapcb kernel: PCI routing table version 1.0 at 0xfbd70
Jul 11 10:04:51 lapcb kernel: Intel PCIC probe: 
Jul 11 10:04:51 lapcb kernel:   TI 1225 PCI-to-CardBus at slot 00:03, mem 0x68000000
Jul 11 10:04:51 lapcb kernel:     host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/176] [bus 32/34]
Jul 11 10:04:51 lapcb kernel:     host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/176] [bus 35/37]
Jul 11 10:04:51 lapcb kernel:     ISA irqs (scanned) = 3,4,7,9,10 PCI status changes
Jul 11 10:04:51 lapcb cardmgr[718]: starting, version is 3.1.11
Jul 11 10:04:51 lapcb cardmgr[718]: watching 2 sockets
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f 0x4d0-0x4d7
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0a00-0x0aff: clean.

----------------------------------------
2. inserting Xircom as first card

Jul 11 10:05:47 lapcb kernel: cs: cb_alloc(bus 32): vendor 0x115d, device 0x0003
Jul 11 10:05:47 lapcb cardmgr[718]: initializing socket 0
Jul 11 10:05:47 lapcb kernel: ROM image dump:
Jul 11 10:05:47 lapcb kernel:   image 0: 0x000000-0x00ffff, signature PCIR
Jul 11 10:05:47 lapcb cardmgr[718]: unsupported card in socket 0
Jul 11 10:05:47 lapcb cardmgr[718]:   no product info available

----------------------------------------
3. ejecting Xircom

Jul 11 10:06:47 lapcb kernel: cs: cb_free(bus 32)

----------------------------------------
4. inserting SCSI, there is no device attached, thus the messages

Jul 11 10:07:23 lapcb cardmgr[718]: initializing socket 1
Jul 11 10:07:23 lapcb cardmgr[718]: socket 1: Adaptec APA-1460 SlimSCSI
Jul 11 10:07:23 lapcb kernel: cs: warning: no high memory space available!
Jul 11 10:07:23 lapcb kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
Jul 11 10:07:23 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/aha152x_cs.o'
Jul 11 10:07:24 lapcb kernel: aha152x: processing commandline: ok
Jul 11 10:07:24 lapcb kernel: aha152x: BIOS test: passed, detected 1 controller(s)
Jul 11 10:07:24 lapcb kernel: aha152x0: vital data: PORTBASE=0x140, IRQ=3, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Jul 11 10:07:24 lapcb kernel: aha152x: trying software interrupt, ok.
Jul 11 10:07:24 lapcb kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
Jul 11 10:07:24 lapcb kernel: scsi : 1 host.
Jul 11 10:07:26 lapcb kernel: aha152x_cs: no SCSI devices found
Jul 11 10:07:26 lapcb cardmgr[718]: get dev info on socket 1 failed: Kein passendes Gerät gefunden
Jul 11 10:07:26 lapcb kernel: scsi : 0 hosts.

----------------------------------------
5. inserting Xircom and everything works fine

Jul 11 10:09:04 lapcb cardmgr[718]: initializing socket 0
Jul 11 10:09:04 lapcb cardmgr[718]: socket 0: Xircom CardBus 10/100 Ethernet + 56K Modem
Jul 11 10:09:04 lapcb kernel: cs: cb_alloc(bus 32): vendor 0x115d, device 0x0003
Jul 11 10:09:04 lapcb kernel: ROM image dump:
Jul 11 10:09:04 lapcb kernel:   image 0: 0x000000-0x0001ff, signature PCIR
Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/cb_enabler.o'
Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/tulip_cb.o'
Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/serial_cb.o'
Jul 11 10:09:04 lapcb kernel: cs: cb_config(bus 32)
Jul 11 10:09:04 lapcb kernel:   fn 0 bar 2: mem 0xfb000-0xfb7ff
Jul 11 10:09:04 lapcb kernel:   fn 0 bar 3: mem 0xfa000-0xfa7ff
Jul 11 10:09:04 lapcb kernel:   fn 1 bar 1: io 0x480-0x487
Jul 11 10:09:04 lapcb kernel:   fn 1 bar 2: mem 0xf9000-0xf97ff
Jul 11 10:09:04 lapcb kernel:   fn 1 bar 3: mem 0xf8000-0xf87ff
Jul 11 10:09:04 lapcb kernel:   fn 0 bar 1: io 0x400-0x47f
Jul 11 10:09:04 lapcb kernel:   fn 0 rom: mem 0xf4000-0xf7fff
Jul 11 10:09:04 lapcb kernel:   fn 1 rom: mem 0xf0000-0xf3fff
Jul 11 10:09:04 lapcb kernel: cs: cb_enable(bus 32)
Jul 11 10:09:04 lapcb kernel:   bridge io map 0 (flags 0x21): 0x400-0x487
Jul 11 10:09:04 lapcb kernel:   bridge mem map 0 (flags 0x1): 0xf0000-0xfbfff
Jul 11 10:09:04 lapcb kernel: tulip_reap()
Jul 11 10:09:04 lapcb kernel: tulip_attach(bus 32, function 0)
Jul 11 10:09:04 lapcb kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Jul 11 10:09:04 lapcb kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:10:A4:DF:7D:6F, IRQ 11.
Jul 11 10:09:04 lapcb kernel: eth0:  MII transceiver #0 config 3100 status 7809 advertising 01e1.
Jul 11 10:09:04 lapcb kernel: serial_attach(bus 32, fn 1)
Jul 11 10:09:04 lapcb kernel: tty02 at 0x0480 (irq = 11) is a 16550A
Jul 11 10:09:04 lapcb cardmgr[718]: executing: './network start eth0'
Jul 11 10:09:04 lapcb kernel: eth0: Promiscuous mode enabled.
Jul 11 10:09:04 lapcb kernel: device eth0 entered promiscuous mode
Jul 11 10:09:04 lapcb cardmgr[718]: executing: './serial start ttyS2'

Next-in-Thread Next Message

Add Message to: "Re: Memory probe issue"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10