Next-in-Thread Next Message

None Re: Memory probe issue 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Sad CBEM 10/100 recognized only if SCSI is inserted before (Christoph Blaue)
Re: None Memory probe issue (David Hinds)
Date: 2000, Jul 11
From: Christoph Blaue cb

I tried this, but it does not work, I only found, that I get a warning in my
syslog 'no high memory space available!', when inserting the SCSI card. I have
excluded things to get the token ring adapter working.

here is a complete syslog from the start of my pcmcia services

----------------------------------------
1. start of pcmcia

Jul 11 10:04:51 lapcb kernel: Linux PCMCIA Card Services 3.1.11
Jul 11 10:04:51 lapcb kernel:   kernel build: 2.2.14 #1 Mon Mar 13 10:51:48 GMT 2000
Jul 11 10:04:51 lapcb kernel:   options:  [pci] [cardbus]
Jul 11 10:04:51 lapcb kernel: PCI routing table version 1.0 at 0xfbd70
Jul 11 10:04:51 lapcb kernel: Intel PCIC probe: 
Jul 11 10:04:51 lapcb kernel:   TI 1225 PCI-to-CardBus at slot 00:03, mem 0x68000000
Jul 11 10:04:51 lapcb kernel:     host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/176] [bus 32/34]
Jul 11 10:04:51 lapcb kernel:     host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/176] [bus 35/37]
Jul 11 10:04:51 lapcb kernel:     ISA irqs (scanned) = 3,4,7,9,10 PCI status changes
Jul 11 10:04:51 lapcb cardmgr[718]: starting, version is 3.1.11
Jul 11 10:04:51 lapcb cardmgr[718]: watching 2 sockets
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f 0x4d0-0x4d7
Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0a00-0x0aff: clean.

----------------------------------------
2. inserting Xircom as first card

Jul 11 10:05:47 lapcb kernel: cs: cb_alloc(bus 32): vendor 0x115d, device 0x0003
Jul 11 10:05:47 lapcb cardmgr[718]: initializing socket 0
Jul 11 10:05:47 lapcb kernel: ROM image dump:
Jul 11 10:05:47 lapcb kernel:   image 0: 0x000000-0x00ffff, signature PCIR
Jul 11 10:05:47 lapcb cardmgr[718]: unsupported card in socket 0
Jul 11 10:05:47 lapcb cardmgr[718]:   no product info available

----------------------------------------
3. ejecting Xircom

Jul 11 10:06:47 lapcb kernel: cs: cb_free(bus 32)

----------------------------------------
4. inserting SCSI, there is no device attached, thus the messages

Jul 11 10:07:23 lapcb cardmgr[718]: initializing socket 1
Jul 11 10:07:23 lapcb cardmgr[718]: socket 1: Adaptec APA-1460 SlimSCSI
Jul 11 10:07:23 lapcb kernel: cs: warning: no high memory space available!
Jul 11 10:07:23 lapcb kernel: cs: memory probe 0x0d0000-0x0dffff: clean.
Jul 11 10:07:23 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/aha152x_cs.o'
Jul 11 10:07:24 lapcb kernel: aha152x: processing commandline: ok
Jul 11 10:07:24 lapcb kernel: aha152x: BIOS test: passed, detected 1 controller(s)
Jul 11 10:07:24 lapcb kernel: aha152x0: vital data: PORTBASE=0x140, IRQ=3, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled
Jul 11 10:07:24 lapcb kernel: aha152x: trying software interrupt, ok.
Jul 11 10:07:24 lapcb kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $
Jul 11 10:07:24 lapcb kernel: scsi : 1 host.
Jul 11 10:07:26 lapcb kernel: aha152x_cs: no SCSI devices found
Jul 11 10:07:26 lapcb cardmgr[718]: get dev info on socket 1 failed: Kein passendes Gerät gefunden
Jul 11 10:07:26 lapcb kernel: scsi : 0 hosts.

----------------------------------------
5. inserting Xircom and everything works fine

Jul 11 10:09:04 lapcb cardmgr[718]: initializing socket 0
Jul 11 10:09:04 lapcb cardmgr[718]: socket 0: Xircom CardBus 10/100 Ethernet + 56K Modem
Jul 11 10:09:04 lapcb kernel: cs: cb_alloc(bus 32): vendor 0x115d, device 0x0003
Jul 11 10:09:04 lapcb kernel: ROM image dump:
Jul 11 10:09:04 lapcb kernel:   image 0: 0x000000-0x0001ff, signature PCIR
Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/cb_enabler.o'
Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/tulip_cb.o'
Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/serial_cb.o'
Jul 11 10:09:04 lapcb kernel: cs: cb_config(bus 32)
Jul 11 10:09:04 lapcb kernel:   fn 0 bar 2: mem 0xfb000-0xfb7ff
Jul 11 10:09:04 lapcb kernel:   fn 0 bar 3: mem 0xfa000-0xfa7ff
Jul 11 10:09:04 lapcb kernel:   fn 1 bar 1: io 0x480-0x487
Jul 11 10:09:04 lapcb kernel:   fn 1 bar 2: mem 0xf9000-0xf97ff
Jul 11 10:09:04 lapcb kernel:   fn 1 bar 3: mem 0xf8000-0xf87ff
Jul 11 10:09:04 lapcb kernel:   fn 0 bar 1: io 0x400-0x47f
Jul 11 10:09:04 lapcb kernel:   fn 0 rom: mem 0xf4000-0xf7fff
Jul 11 10:09:04 lapcb kernel:   fn 1 rom: mem 0xf0000-0xf3fff
Jul 11 10:09:04 lapcb kernel: cs: cb_enable(bus 32)
Jul 11 10:09:04 lapcb kernel:   bridge io map 0 (flags 0x21): 0x400-0x487
Jul 11 10:09:04 lapcb kernel:   bridge mem map 0 (flags 0x1): 0xf0000-0xfbfff
Jul 11 10:09:04 lapcb kernel: tulip_reap()
Jul 11 10:09:04 lapcb kernel: tulip_attach(bus 32, function 0)
Jul 11 10:09:04 lapcb kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford)
Jul 11 10:09:04 lapcb kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:10:A4:DF:7D:6F, IRQ 11.
Jul 11 10:09:04 lapcb kernel: eth0:  MII transceiver #0 config 3100 status 7809 advertising 01e1.
Jul 11 10:09:04 lapcb kernel: serial_attach(bus 32, fn 1)
Jul 11 10:09:04 lapcb kernel: tty02 at 0x0480 (irq = 11) is a 16550A
Jul 11 10:09:04 lapcb cardmgr[718]: executing: './network start eth0'
Jul 11 10:09:04 lapcb kernel: eth0: Promiscuous mode enabled.
Jul 11 10:09:04 lapcb kernel: device eth0 entered promiscuous mode
Jul 11 10:09:04 lapcb cardmgr[718]: executing: './serial start ttyS2'

Next-in-Thread Next Message

Select this message: Re: Memory probe issue

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.


If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination
NO


If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages
NO


Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]