I tried this, but it does not work, I only found, that I get a warning in my syslog 'no high memory space available!', when inserting the SCSI card. I have excluded things to get the token ring adapter working. here is a complete syslog from the start of my pcmcia services ---------------------------------------- 1. start of pcmcia Jul 11 10:04:51 lapcb kernel: Linux PCMCIA Card Services 3.1.11 Jul 11 10:04:51 lapcb kernel: kernel build: 2.2.14 #1 Mon Mar 13 10:51:48 GMT 2000 Jul 11 10:04:51 lapcb kernel: options: [pci] [cardbus] Jul 11 10:04:51 lapcb kernel: PCI routing table version 1.0 at 0xfbd70 Jul 11 10:04:51 lapcb kernel: Intel PCIC probe: Jul 11 10:04:51 lapcb kernel: TI 1225 PCI-to-CardBus at slot 00:03, mem 0x68000000 Jul 11 10:04:51 lapcb kernel: host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/176] [bus 32/34] Jul 11 10:04:51 lapcb kernel: host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/176] [bus 35/37] Jul 11 10:04:51 lapcb kernel: ISA irqs (scanned) = 3,4,7,9,10 PCI status changes Jul 11 10:04:51 lapcb cardmgr[718]: starting, version is 3.1.11 Jul 11 10:04:51 lapcb cardmgr[718]: watching 2 sockets Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0800-0x08ff: excluding 0x800-0x84f Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x280-0x287 0x378-0x37f 0x4d0-0x4d7 Jul 11 10:04:51 lapcb kernel: cs: IO port probe 0x0a00-0x0aff: clean. ---------------------------------------- 2. inserting Xircom as first card Jul 11 10:05:47 lapcb kernel: cs: cb_alloc(bus 32): vendor 0x115d, device 0x0003 Jul 11 10:05:47 lapcb cardmgr[718]: initializing socket 0 Jul 11 10:05:47 lapcb kernel: ROM image dump: Jul 11 10:05:47 lapcb kernel: image 0: 0x000000-0x00ffff, signature PCIR Jul 11 10:05:47 lapcb cardmgr[718]: unsupported card in socket 0 Jul 11 10:05:47 lapcb cardmgr[718]: no product info available ---------------------------------------- 3. ejecting Xircom Jul 11 10:06:47 lapcb kernel: cs: cb_free(bus 32) ---------------------------------------- 4. inserting SCSI, there is no device attached, thus the messages Jul 11 10:07:23 lapcb cardmgr[718]: initializing socket 1 Jul 11 10:07:23 lapcb cardmgr[718]: socket 1: Adaptec APA-1460 SlimSCSI Jul 11 10:07:23 lapcb kernel: cs: warning: no high memory space available! Jul 11 10:07:23 lapcb kernel: cs: memory probe 0x0d0000-0x0dffff: clean. Jul 11 10:07:23 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/aha152x_cs.o' Jul 11 10:07:24 lapcb kernel: aha152x: processing commandline: ok Jul 11 10:07:24 lapcb kernel: aha152x: BIOS test: passed, detected 1 controller(s) Jul 11 10:07:24 lapcb kernel: aha152x0: vital data: PORTBASE=0x140, IRQ=3, SCSI ID=7, reconnect=enabled, parity=enabled, synchronous=disabled, delay=100, extended translation=disabled Jul 11 10:07:24 lapcb kernel: aha152x: trying software interrupt, ok. Jul 11 10:07:24 lapcb kernel: scsi0 : Adaptec 152x SCSI driver; $Revision: 1.7 $ Jul 11 10:07:24 lapcb kernel: scsi : 1 host. Jul 11 10:07:26 lapcb kernel: aha152x_cs: no SCSI devices found Jul 11 10:07:26 lapcb cardmgr[718]: get dev info on socket 1 failed: Kein passendes Gerät gefunden Jul 11 10:07:26 lapcb kernel: scsi : 0 hosts. ---------------------------------------- 5. inserting Xircom and everything works fine Jul 11 10:09:04 lapcb cardmgr[718]: initializing socket 0 Jul 11 10:09:04 lapcb cardmgr[718]: socket 0: Xircom CardBus 10/100 Ethernet + 56K Modem Jul 11 10:09:04 lapcb kernel: cs: cb_alloc(bus 32): vendor 0x115d, device 0x0003 Jul 11 10:09:04 lapcb kernel: ROM image dump: Jul 11 10:09:04 lapcb kernel: image 0: 0x000000-0x0001ff, signature PCIR Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/cb_enabler.o' Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/tulip_cb.o' Jul 11 10:09:04 lapcb cardmgr[718]: executing: 'insmod /lib/modules/2.2.14/pcmcia/serial_cb.o' Jul 11 10:09:04 lapcb kernel: cs: cb_config(bus 32) Jul 11 10:09:04 lapcb kernel: fn 0 bar 2: mem 0xfb000-0xfb7ff Jul 11 10:09:04 lapcb kernel: fn 0 bar 3: mem 0xfa000-0xfa7ff Jul 11 10:09:04 lapcb kernel: fn 1 bar 1: io 0x480-0x487 Jul 11 10:09:04 lapcb kernel: fn 1 bar 2: mem 0xf9000-0xf97ff Jul 11 10:09:04 lapcb kernel: fn 1 bar 3: mem 0xf8000-0xf87ff Jul 11 10:09:04 lapcb kernel: fn 0 bar 1: io 0x400-0x47f Jul 11 10:09:04 lapcb kernel: fn 0 rom: mem 0xf4000-0xf7fff Jul 11 10:09:04 lapcb kernel: fn 1 rom: mem 0xf0000-0xf3fff Jul 11 10:09:04 lapcb kernel: cs: cb_enable(bus 32) Jul 11 10:09:04 lapcb kernel: bridge io map 0 (flags 0x21): 0x400-0x487 Jul 11 10:09:04 lapcb kernel: bridge mem map 0 (flags 0x1): 0xf0000-0xfbfff Jul 11 10:09:04 lapcb kernel: tulip_reap() Jul 11 10:09:04 lapcb kernel: tulip_attach(bus 32, function 0) Jul 11 10:09:04 lapcb kernel: tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov (modified by danilo@cs.uni-magdeburg.de for XIRCOM CBE, fixed by Doug Ledford) Jul 11 10:09:04 lapcb kernel: eth0: Xircom Cardbus Adapter (DEC 21143 compatible mode) rev 3 at 0x400, 00:10:A4:DF:7D:6F, IRQ 11. Jul 11 10:09:04 lapcb kernel: eth0: MII transceiver #0 config 3100 status 7809 advertising 01e1. Jul 11 10:09:04 lapcb kernel: serial_attach(bus 32, fn 1) Jul 11 10:09:04 lapcb kernel: tty02 at 0x0480 (irq = 11) is a 16550A Jul 11 10:09:04 lapcb cardmgr[718]: executing: './network start eth0' Jul 11 10:09:04 lapcb kernel: eth0: Promiscuous mode enabled. Jul 11 10:09:04 lapcb kernel: device eth0 entered promiscuous mode Jul 11 10:09:04 lapcb cardmgr[718]: executing: './serial start ttyS2' |