Next-in-Thread Next Message

None Re: The IO port allocations are done differently now 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Problems with serial on CEM56 (Pål Løberg)
Re: None The IO port allocations are done differently now (David Hinds)
Date: 2000, Jul 11
From: =?iso-8859-1?Q?P=E5l_L=F8berg?= pallo

> > serial_cs: register_serial() at 0x0ae8, irq 3 failed
> 
> I'd try removing the 0xa00-0xaff port window in
> /etc/pcmcia/config.opts and see if that helps.  You can also remove
> the 0x1000-0x17ff window if needed.

I've tried to change the port windows a bit, but when I remove both
0x1000-0x17ff and 0xa00-0xaff I get the error:

  xirc2ps_cs: no ports available

and notthing works. If I add or change the port windows, I get the same
message as before "serial_cs: register_serial() at 0xXXXX, irq 3 failed"
with different IO addresses.

Any suggestions on how to find the right port windows to use?

 -- Pål

Next-in-Thread Next Message

Messages Inline: 0 All Outline: 1 2 All

None Do you still have your old log files?

Re: None Re: The IO port allocations are done differently now (=?iso-8859-1?Q?P=E5l_L=F8berg?=)
Date: 2000, Jul 11
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> 
> Any suggestions on how to find the right port windows to use?

I'd find out what was used before you did the driver upgrade.

-- Dave
1. None Re: Do you still have your old log files? by Pål Løberg, 2000, Jul 13
Re: The IO port allocations are done differently now


Members Subscribe No Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10
[ Edit This Forum ]