Next-in-Thread Next Message

None Re: The IO port allocations are done differently now 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Problems with serial on CEM56 (Pål Løberg)
Re: None The IO port allocations are done differently now (David Hinds)
Date: 2000, Jul 11
From: =?iso-8859-1?Q?P=E5l_L=F8berg?= pallo

> > serial_cs: register_serial() at 0x0ae8, irq 3 failed
> I'd try removing the 0xa00-0xaff port window in
> /etc/pcmcia/config.opts and see if that helps.  You can also remove
> the 0x1000-0x17ff window if needed.

I've tried to change the port windows a bit, but when I remove both
0x1000-0x17ff and 0xa00-0xaff I get the error:

  xirc2ps_cs: no ports available

and notthing works. If I add or change the port windows, I get the same
message as before "serial_cs: register_serial() at 0xXXXX, irq 3 failed"
with different IO addresses.

Any suggestions on how to find the right port windows to use?

 -- Pål

Next-in-Thread Next Message

Select this message: Re: The IO port allocations are done differently now

Messages Inline: 1 All Outline: 1 3 All

1. None Do you still have your old log files? by David Hinds, 2000, Jul 11
(_ None Re: Do you still have your old log files? by Pål Løberg, 2000, Jul 13

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]