Next-in-Thread Next Message

None Re: Do you still have your old log files? 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Problems with serial on CEM56 (Pål Løberg)
Re: None The IO port allocations are done differently now (David Hinds)
Re: None Re: The IO port allocations are done differently now (=?iso-8859-1?Q?P=E5l_L=F8berg?=)
Re: None Do you still have your old log files? (David Hinds)
Date: 2000, Jul 13
From: =?iso-8859-1?Q?P=E5l_L=F8berg?= pallo

[David Hinds]
> > 
> > Any suggestions on how to find the right port windows to use?
> I'd find out what was used before you did the driver upgrade.

It was 0x300-0x30f for eth0 and 0x02f8-0x02ff for ttyS1, but when I edit
/etc/pcmcia/config.opts and only include the lines:

 include port 0x300-0x3ff
 include port 0x2f8-0x2ff
 include memory 0xc0000-0xfffff 
 include memory 0xa0000000-0xa0ffffff, memory 0x60000000-0x60ffffff

the ethernet drivers fail to load with the error "no ports available",
and the serial is not attempted.

Any ideas? Maybe I could force xirc2ps_cs to use 0x300-0x3ff and serial_cs
to use 0x2f8-0x2ff somehow?

 -- Pål

Next-in-Thread Next Message

Select this message: Re: Do you still have your old log files?

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]