[ Next-in-Thread ]  [ Next Message ] 

That's good news 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Sad: RBEM56G-100BTX on HP Omnibook 4150 (Hester Van Rooyen)
Re: Idea: Possible solution (Hester Van Rooyen)
Date: 2000, Aug 02
From: David Hinds <dhinds@pcmcia.sourceforge.org>

> 
> This seems to solve the problem! I have booted the notebook with the
> Xircom card inserted several times and have had no further problems.

That's very interesting.  You might try reconfiguring the PCMCIA
drivers with "PnP BIOS support" enabled.  Then look at the output of
"lspnp -v" to get a detailed resource listing for all your devices.

Regarding installing the new PCMCIA drivers, go to the 3.1.19
directory and do "make config" again and carefully check the output.
I suspect that you've got some sort of mismatch between your kernel
tree and the kernel you're running.  You can also run the "test_setup"
script in the debug-tools directory.

>  modprobe: Can't locate module block-major-22

My guess is that this message has nothing to do with the network
device.  Block major device 22 is an IDE device.

-- Dave

[ Next-in-Thread ]  [ Next Message ] 

[ Add Message ]  to: "That's good news"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]