Next-in-Thread Next Message

Note more info 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Sad RB100 - ping itself ok, ping outside no response, arp no h/w address (Alan Tam)
Date: 2000, Aug 28
From: Alan Tam dogwheel

Summary of my Findings (all the following is under kernel 2.2.16, and my card is probed as DEC 21143 compatible mode revision 3)

pcmcia-cs 3.0.14:
  compile tulip_cb.c v0.91 4/14/99
  probed my eth0 at 0xa00
  probed my ttyS0 at 0xa80
  *result: two high beeps during boot, eth0 UP and responds to pings from attaching network

pcmcia-cs 3.1.19:
  compile tulip_cb.c v0.91g 7/16/99
  probed my card as DEC 21143 compatible mode revision 3
  probed my eth0 at 0x100
  probed my ttyS0 at 0x180
  *result: two high beeps during boot, eth0 UP but NOT responds to pings from attaching network
  *resolution: after enabled promiscous mode it can be ping

Any idea? Is 3.1.19 wrongly probed the address?

Regards, Alan

Next-in-Thread Next Message

Messages Inline: 1 All Outline: 1 2 All

1. Ok more info - ok now by Alan Tam, 2000, Aug 31

Add Message to: "more info"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10