Question: Problems with cs-3.1.4 and Kernel 2.2.13 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Date: 1999, Nov 17
From: Stefan Kapfhammer StefanKapfhammer

Hardware: Toshiba TECRA 8000 with RBEM56-10/100BTX After a successful run with Kernel 2.2.10 and cs-3.1.4, I upgraded to Kernel-release 2.2.13. Have error-msg with dmesg: cs: socket 0 timed out during reset This happens with BIOS-Setting ToPIC95B and ToPIC97. I used irq_list=10 in /sbin/init.d/pcmcia under PCIC_OPTS. That has worked fine in 2.2.10 Kernel. After suspending and resuming socket 0 the cs recognised the right card, but cannot access the ttyS* with wvdial nor minicom. Are there any workarounds available or a specific Kernel parameters to set (build-in/modules) Regards, Stefan

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. Ok: ttys* init by Philippe Henry, 1999, Nov 18

1. Question: RBEM56G eth0 timed out when used with ISDN modem (ipmasq) by Jean-Pierre Hermand, 1999, Nov 18

1. The card is dropping interrupts by David Hinds, 1999, Nov 20

... 1 Message(s)

2. Feedback: Partial success by Stefan Kapfhammer, 1999, Nov 19

[ Add Message ]  to: "Problems with cs-3.1.4 and Kernel 2.2.13"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]