Next-in-Thread Next Message

Question RBEM56G eth0 timed out when used with ISDN modem (ipmasq) 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Problems with cs-3.1.4 and Kernel 2.2.13 (Stefan Kapfhammer)
Re: Ok ttys* init (Philippe Henry)
Date: 1999, Nov 18
From: Jean-Pierre Hermand jph

Tecra8000/kernel 2.2.13/pcmcia 3.1.2

Any idea why eth0 timed out (TX hung) when using SIMULTANEOUSLY 10 Mbit ethernet and modem-emulated ISDN with a ipmasq (ipchains) setup?

Problems also occur with extensive pinging home lan meanwhile connected to ISP via PPP.

the Xircom RBEM56G is assigned irq 10.

I saw a few messages in the old forums about eth0 timed out but nobody ever replied to these messages.

Next-in-Thread Next Message

Select this message: RBEM56G eth0 timed out when used with ISDN modem (ipmasq)

Messages Inline: 1 All Outline: 1 2 All

1. None The card is dropping interrupts by David Hinds, 1999, Nov 20
(_ Question Checking dropped interrupts by Stefan Kapfhammer, 1999, Nov 20

Message Administration

This form allows you to delete, move, or copy one or more messages. You can move messages by copying and deleting the original. The action will be applied to the messages you select above and all replies to those selected messages.

If you want to copy or move messages, specify the HyperNews path of a destination forum or message that all messages will be copied or moved to. The destination must already exist, so maybe create it first.

Path of Destination (a Forum or Message): (e.g. "test")

Notify Subscribers at destination

If you want to delete messages (the default), specify that here. If you want to move messages, you need to delete the original messages; placeholders will be left pointing to where they were moved.

Delete Messages

Caution: After deleteing messages (the default), if you have not copied them (i.e. no destination above), then the selected messages are not be recoverable.

Members Subscribe No Admin Mode Show Frames Help for HyperNews at 1.10
[ Edit This Forum ]