Question: RBEM56G eth0 timed out when used with ISDN modem (ipmasq) 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question: Problems with cs-3.1.4 and Kernel 2.2.13 (Stefan Kapfhammer)
Re: Ok: ttys* init (Philippe Henry)
Date: 1999, Nov 18
From: Jean-Pierre Hermand jph

Tecra8000/kernel 2.2.13/pcmcia 3.1.2 Any idea why eth0 timed out (TX hung) when using SIMULTANEOUSLY 10 Mbit ethernet and modem-emulated ISDN with a ipmasq (ipchains) setup? Problems also occur with extensive pinging home lan meanwhile connected to ISP via PPP. the Xircom RBEM56G is assigned irq 10. I saw a few messages in the old forums about eth0 timed out but nobody ever replied to these messages.

[ Next-in-Thread ]  [ Next Message ] 

Messages Inline: [ 1 ]  [ All ]  Outline: [ 1 ]  [ 2 ]  [ All ] 

1. The card is dropping interrupts by David Hinds, 1999, Nov 20

(_ Question: Checking dropped interrupts by Stefan Kapfhammer, 1999, Nov 20

[ Add Message ]  to: "RBEM56G eth0 timed out when used with ISDN modem (ipmasq)"

[ Members ]  [ Subscribe ]  [ Admin Mode ] 
[ Show Frames ]  [ Help for HyperNews at pcmcia-cs.sourceforge.net 1.10 ]