Next-in-Thread Next Message

Sad Still Having Problems 

Forum: Xircom PCMCIA Ethernet Adapter Issues
Re: Question Problem getting 100BaseT FDX on a REM56G-100 (Zaphod Beeblebrox)
Re: Idea Possible solution (David Levin)
Date: 1999, Dec 17
From: Zaphod Beeblebrox Zaph0d

I am not sure what NWay is...

I am not forcing any of the modes, It appears to get 100FDX when the interface comes up then somehow the link lights go down again and when they come back up it is only at HDX. I am wondering if it is something to do with pump or if it is the driver. I have however tried it without using pump and the noted the following, as soon as I plug in the RealPort card into the pcmcia socket I get all three lights on the switch (link,100,FDX). The first beep is heard and all seems ok, then all three lights go out and the second beep is heard.

Hope this helps, I am running STD RH6.2 I did try the latest pcmcia modules but it didn't make a difference.

Next-in-Thread Next Message

Add Message to: "Still Having Problems"

Members Subscribe Admin Mode Show Frames Help for HyperNews at pcmcia-cs.sourceforge.net 1.10